Summary of Contents for Danacoid DY-M1 Plus
- Page 1 Cloud Platform Control Center DY-M1 Plus Instruction Manual Danacoid International Pte Ltd. 1 / 6...
- Page 2 I. Product Appearance and Description Power indicator: The indicator of power supply, which becomes on when the device is electrified ‚ Standby indicator: The indicator of status ƒ RUN indicator: The indicator of device running, which becomes on during signal transmission „...
- Page 3 † Power port: Connect to the power cable for power supply II. Product Features Strengthened cloud platform control center adopts embedded hardware development, and operate optimized embedded Linux system Free of virus infection, high security Conduct concentrated management on all interface machines, scan automatically to identify the interface machines within the network range and complete auto configuration...
- Page 4 Support DM-700LK/DE-7000HD/DE-SDI2I /DE-BNC8I, achieve dual-network backup Support DM-700LK captions and dynamic base III. Product Specifications Product Model DY-M1 Plus; 19-inch industrial standard 1U rack-mount server Processor ARM-A8 chip, main frequency Memory ≥1.6GB 64-bit DDR3...
- Page 5 indicator; RUN indicator OLED Front Dual OLED screen, used for display Screen of server IP, running state and other information Rear Panel Power switch: Touch-tone switch Serial Equipped with D-sub9 Communication independent serial port, used for reading of working log and system codes Internet Port High-precision...
- Page 6 IV. System Architecture 1) Confirm that there is DHCP server or router with DHCP functions in the network, so as to allocate legitimate IP addresses to all network devices in the system 2) Set the IP address of MICS server as static, such as 192.168.1.80, which will be beneficial to client login and IIS setting 3) Conduct system connection and construction in...
Need help?
Do you have a question about the DY-M1 Plus and is the answer not in the manual?
Questions and answers