TECHLIGHTING Cosmo 18 Wall Installation Instructions

Installation Instructions for
Cosmo 12/18 Wall
G ENERAL RODUCT NFORMATION P I
These fixtures are intended to be installed
utilizing NEC compliant junction boxes.
This product may be dimmed with a low-voltage electronic
dimmer or a 0-10V dimmer depending on the wiring
configuration.
Suitable for wet locations.

Install the Fixture

1A
FIXTURE
SCREW
1
ALLEN
WRENCH
1
With the provided Allen wrench, remove the two
mounting plate screws.
Remove the mounting plate from the back of the
2
fixture.
OUTDOOR
:
MOUNTING
PLATE
1
CAUTION RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
1B
#8-32 SCREW #8-32 SCREW
3
Install the mounting plate onto the electrical box with
3
the two #8-32 screws provided.
1
920OWCOSMO
700OWCOS_
-
3
ELECTRICAL BOX
1.1