Pioneer DJC-1000RV Installation Manual page 3

English
Thank you for purchasing this Pioneer product. This kit
has been designed for use with the Pioneer DJ Mixer
DJM-1000, and allow the mixer's standard slider-type
fader controls to be replaced by rotary-type controls. The
rotary channel fader supports the same fader start func-
tion as the slider-type control.
WARNING
Do not attempt to install this kit by your-
self!
This kit requires professional expertise and must
be installed by a specially trained technician.
For details, inquire at your nearest authorized Pio-
neer service center. (Consult your retail dealer for
more information regarding authorized Pioneer
service centers.)
To the Installing Service Personnel
Install this panel unit as depicted in the accompanying
illustrations and instructions.
÷ Before beginning work, be sure to disconnect the
power cord from its supply outlet.
1. Remove the four screws at the corners of
the fader panel, and remove the panel.
2. Disconnect the cable connectors (6).
NOTE:
Installation of this kit requires specialized professional
training and expertise. Consult your nearest autho-
rized Pioneer service center for installation (installa-
tion fee must be paid by user).
Attempting to install this kit by yourself can be very
dangerous, and may result not only in damage to the
unit, but fire or electrical shock. Pioneer can accept
no liability for injuries or damages resulting from in-
stallations or modifications performed by the cus-
tomer.
Confirm Package Contents
❑
Fader Unit x 1
❑
This Installation Manual x 1
❑
Warranty Card (for USA) x 1
❑
Warranty Card (for Japan) x 1
3. Connect the cable connectors of the fader
unit (6).
÷ Insert the connectors securely, taking care to
connect them in the proper order.
4. Place the fader panel in its proper location
and fasten using the four corner screws.
÷ Take care not to pinch the wiring between the
panel and other parts when replacing the fader
panel.
÷ Store the removed fader panel in the packing
box for this kit.
DJC-1000RV
3