Table of Contents
Advertisement
Quick Links
1. Product Introduction
Super slim & light mobile storage device using 2.5" HDD
Supporting both USB2.0 and IEEE1394 with lightning speed
One touch assembly without screws
Blue LED for operation indicator
No external power required
Plug & Play and Hot Plugging
Scheduling auto back-up software
Aluminum for heat management & deluxe case
2. Specification
Interface
Model
Transfer Rate
Hard Disk
Domension
Weight
Power Source
Windows
OS
Mac
Contents
3. System Environment
[ Windows PC ]
USB 2.0 / 1.1
-
System : Pentium or higher IBM compatible PC or Mac
Memory : Over 32MB
-
OS : Windows 98 / ME / 2000 / XP, Mac OS 8.6 & higher
-
-
Interface : USB2.0 / 1.1 port
(For USB2.0 support, USB2.0 based main board or USB 2.0 PCI card, or PCMCIA cards are required)
CD Drive for driver installation or internet connection for download of installation driver
-
IEEE 1394
-
System : Pentium or higher IBM compatible PC or Mac
Memory : Over 32MB
-
User's Manual
USB 2.0
SPIO 252
480Mbps
2.5", 9.5mm IDE Hard Disk
128 x 75 x 145 (D x W x H)
180g (HDD included)
98 / 98SE / ME / 2000 / XP (IEEE1394 is supported from Win98SE)
SPIO, Cable, Driver & Auto backup Software CD, Manual, Leather Bag
USB 2.0 + IEEE 1394
480Mbps / 400Mbps
Bus Power
OS 8.6 Higher
SPIO 255
Advertisement
Table of Contents
Summary of Contents for Value Plus SPIO 252
-
Page 1: Product Introduction
Scheduling auto back-up software Aluminum for heat management & deluxe case 2. Specification Interface USB 2.0 USB 2.0 + IEEE 1394 Model SPIO 252 SPIO 255 Transfer Rate 480Mbps 480Mbps / 400Mbps Hard Disk 2.5”, 9.5mm IDE Hard Disk Domension... -
Page 2: Name Of Each Part
OS : Windows 98 / ME / 2000 / XP, Mac OS 8.6 & higher (IEEE1394 is not available under Win98) Interface : IEEE1394 port (If the port is not exist in the PC, IEEE1394 PCI card, or PCMCIA cards are required) CD Drive for driver installation or internet connection for download of installation driver [Macintosh] USB 2.0/1.1... -
Page 3: Hardware Installation
Hardware Installation 1) Please disassembly “SPIO” to insert Hard disk drive. Top Case Disassembly Step 1. Push the button. Step 2. Slide the cover to the arrow direction. Push Button * Warning. Do not lift up the top case over around 10 degrees. (Hook of aluminum cover in circle area can be broken due to excessive lift Bottom Case Disassembly Step 2. -
Page 4: Installation Guide
7. Installation Guide (1) USB mode: Select the switch to “USB”(Left) USB(1394 POWER) 1394 (2) When the power is not enough from one USB port, please use USB DC Jack shown as below picture. USB DC Jack will provide extra power from another USB port. Switch should be “USB”(Left). USB(1394 POWER) 1394... - Page 5 IEEE 1394 (1) 6pin to 6pin: Select the switch to “1394”(Right) USB(1394 POWER) 1394 1394 1394 (2) When the power is not enough from 6pin port, power can be provided from the USB port. Select the switch to “USB(1394 POWER)”(Middle) USB(1394 POWER) 1394 1394...
-
Page 6: Driver Installation
8. Driver Installation <Installation under Windows 98/ 98SE > After connecting the SPIO to your computer, the Plug & play function will detect the SPIO. When ‘Add New Hardware Wizard’ is shown, follow the installation process as below picture. - Page 8 * After USB driver is installed completely, start installing IEEE1394 driver.
- Page 9 (10) (11)
- Page 10 < Driver Installation under Windows ME / 2000 / XP > SPIO is automatically detected without driver installation under Windows ME, 2000, XP. < Driver Installation under Mac OS 8.x ~ 9.x > SPIO is automatically detected without driver installation under Mac OS 8.6 higher. IEEE 1394 <...
- Page 11 HardCopy(Auto Backup Program) Installation Insert the program into CD-ROM Drive. There is a directory of [Hardcopy]. Double click on the “Hardcopy.exe” icon. Click OK to install the Hardcopy under the default directory. Don’t need to restart your computer. You are ready to use Hardcopy.
-
Page 12: Fcc Compliance Statement
FCC Compliance Statement Caution: Any changes or modification in construction of this device which are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. -
Page 13: Warranty
Warranty Limited Warranty Valueplus warrants that the product enclosed to be free of defects for a period of 1-year from the date of purchase. In the event of a defect in material or workmanship during the warranty period, Valueplus, at its discretion, will repair or replace the defective product when the defectively product is returned to Valueplus by the owner/authorized seller.