Table of Contents
Advertisement
Set Bits per second (baud rate) to 19200, Data bits to 8, Parity to None, Stop bits to 1,
and Flow control to None. Click OK.
The Setup screen appears in the HyperTerminal window. If the text does not appear
immediately, press Ente r.
If the Access Point has no problem, you can find prompt on the terminal program's
display box:
Type disconfig and press Enter to see current default settings of Access Point. Make a
note of the SSID, Channel number and IP address. LG Access Point has a default IP;
100.100.100.100
Page 20 of 50
Advertisement
Table of Contents
