Palm Os Setup - Enfora Wireless Portfolio User Manual

4. Open HotSync® Manager on the host computer. Place the Palm
device in its HotSync® cradle and press the HotSync® button
on the cradle. After the tranfer of files, the software needed to
operate the Wireless Portfolio is now installed onto the Palm device.

Palm OS Setup

Please ensure that the exact sequence for the following setup is followed:
This section explains how to setup the Wireless Portfolio for use with the
Palm OS 3.5 platform. The purpose of this application is to setup the Wireless
Portfolio and create an appropriate dial-up networking entry. This section
describes only the basic Wireless Portfolio parameters required for registering
the modem with the CDPD carrier. For information on setting additional
parameters, see the Modem Setup application. This should also be run when
network parameters are changed.
1. Place the Palm device into the Wireless Portfolio on the right side of
the binder. Position the Wireless Portfolio's IR Transceiver in line
with the IR port of the Palm device (about 1 inch away).
2. Access the Palm Applications screen on the Palm device by tapping
the icon. Open Portfolio Manager by tapping on the Portfolio
program icon (shown below).
CONFIDENTIAL AND PROPRIETARY INFORMATION
Do not duplicate or distribute without express permission from Enfora, Inc.
Enfora, Inc. 661 East 18th Street Plano, TX 75074-5601 www.enfora.com
8