Table of Contents
Advertisement
Disc Playback
This section explains playback of commercially
available BD-VIDEO and DVD-VIDEO discs (like
movies), CDs, and recorded DVD-RW/R discs.
Loading a Disc
Insert the disc into the disc slot.
•
The label side of the disc must face towards the front of the
TV (towards you).
•
When inserting a dual-sided DVD, the side you want to play
must face towards the rear of the TV (away from you).
•
When the disc is loaded, the DISC indicator lights up.
•
Playback may begin automatically, depending on the disc.
•
The menu may be displayed fi rst, depending on the disc.
Perform playback operation by following the directions on
the screen.
•
In the following cases, the disc will be ejected
automatically.
- When a disc using an incompatible standard or format
was inserted.
- When the disc was inserted facing the wrong way.
Removing a Disc
1
on the TV or EJECT on the remote control
Press
unit.
•
The disc is ejected and protrudes partly from the slot.
2
Carefully grasp the protruding disc and pull it out.
•
After a disc has been ejected, it should be removed
from the slot without delay.
Disc slot
The label side of
the disc
(EJECT)
button
•
If the TV is jolted or moved while a disc is protruding from
the slot, the disc may fall out.
•
To reinsert a protruding disc, fi rst remove the disc fully and
then load it again.
•
During loading, the disc may be unable to be ejected. Wait
until the loading is complete and playback starts to eject
the disc.
BD/DVD-VIDEO Playback
BD-VIDEO
DVD-VIDEO
BD-RE
1
Load a disc.
•
Playback may begin automatically, depending on the
disc.
2
Press d.
•
Playback begins from the fi rst title.
•
The menu may be displayed fi rst, depending on the
disc. Perform playback operation by following the
directions on the screen.
•
The disc load time may vary depending on the disc.
•
During playback of HDMI equipment connected to the TV
with AQUOS LINK Control set to "Enable", pressing
controls the HDMI equipment, not the Disc Drive on the TV.
•
Playback on the Disc Drive will stop when you switch the
input source or select a TV channel.
To stop playback
H
Press
.
Resume playback function
After stopping the disc, press d to resume playback
from the point where the disc has been stopped.
To play back from the beginning of the disc, press H twice
•
d
and then press
. (This may not work depending on the
type of disc. In this case, eject the disc or enter standby.)
•
Resume playback may not function depending on the disc.
BD-R
d
23
Advertisement
Table of Contents
Troubleshooting
