Reception; Transmission; Battery Status Indicator; Advanced Operation - Silvercrest SFG 8000 B2 Operating And Safety Instructions Manual

 Press the Menu
 Press the Up  [10] or Down  [7] button to set a different channel.
 Press the PTT button [12] to confirm the setting.
If no button is pressed for five seconds while changing a setting, the handheld transceiver will
return to idle mode and use the previously adjusted setting.

10.4. Reception

The handheld transceiver will be in receive mode as long as it is powered on and not transmitting (idle
mode).

10.5. Transmission

 Keep the PTT button [12] pressed. The TX icon will appear on the display [1].
 Speak into the microphone [9]. Hold the handheld transceiver vertically and
 Release the PTT button [12] when you are done with your message.

10.6. Battery status indicator

When the transceiver is powered on, the number of bars on the battery status indicator [24] will appear
on the display [1] to show the level of the rechargeable or inserted batteries.
When the rechargeable or inserted batteries are exhausted, an acoustic signal will be heard, in which
case replace the batteries or recharge them if using rechargeable batteries.

11. Advanced operation

The Menu button [6] allows you to customize your handheld radio transceiver. For more information
about the functions, see the following pages.
button [6] once. The current channel number will flash on
the display.
approx. 10 cm (4 inches) from your mouth.
Rechargeable batteries/batteries fully charged
Rechargeable batteries/batteries two-thirds charged
Rechargeable batteries/batteries one-third charged
Rechargeable batteries/batteries empty
SilverCrest SFG 8000 B2
English - 19