Page 1
MODEL# 091-133 CAUTION: ANY CHANGE MADE BY THE USER TO THIS EQUIPMENT WITHOUT THE WRITTEN APPROVAL OF KUSSMAUL ELECTRONICS CO INC COULD VOID THE USERS AUTHORITY TO OPERATE THIS EQUIPMENT INPUT, RECEIVER: 120VOLTS, 50/60 Hz AC TRANSMITTER: 12 VOLTS DC OUTPUT: RELAY CONTACT CLOSURE.
The Model 091-133 418 MHz Transmitter/Receiver is a remote control system between a vehicle and a building. It is intended to operate various electrical devices in the building when signaled to do so from the vehicle. The Transmitter is installed in the vehicle above the dash and near the windshield. The receiver is installed on a shelf or on a wall, away from large metallic surfaces.
To change the code, remove the Transmitter and Receiver top covers and change the dip switches. INSTALLATION EXAMPLES Figures 3 a nd 4 show possible installation examples for the Model 091-133 Transmitter and Receiver. There are many other possible installations. Consult Kussmaul Electronics Co. Inc. Engineering Dept.
Page 4
SPECIFICATION AND OUTLINE Operating Frequency: 418 MHz Transmitter Main Input Power: 12 volts D.C. battery. Transmitter Current Draw: Less than 15 milliamperes D.C.. Number of Transmitter independent (or proprietary) Channels: 4 Number of possible Transmitter Codes: 32 Receiver Main Input Power: 115 volts, 60 Hertz Receiver AC Current Draw: 15 milliamperes AC Number of Receiver independent (or proprietary) Channels: 4 Number of Possible Receiver Codes: 32...
Page 5
Vehicle Owner WARRANTY All products of Kussmaul Electronics Company Inc. are warranted to be free of defects of material or workmanship. Liability is limited to repairing or replacing at our factory, without charge, any material or defects which become apparent in normal use within 3 years from the date the equipment was shipped.