Listening To A Cd Or Mp3/Wma Disc - Sharp CD-SW440N Operation Manual

Listening to the iPod (continued)
Watching videos on a TV connected to
iPod
1
Press the DISPLAY (TV OUT) button for more than 2 seconds.
"TV DISP" will appear on display.
2
Press the ENTER button to start playback.
Notes:
● If the TV Out setting is already turned on at video menu, the
video is automatically displayed on the TV screen when
ENTER key is pressed.
● To return to watching video on iPod screen, press the MENU
button to enter video menu. Then press the DISPLAY (TV
OUT) button for more than 2 seconds until "iPodDISP"
appears.
● During iPod video playback, pressing the DISPLAY (TV OUT)
button will not toggle video out display between iPod and TV.
iPod playback detection function:
Once the play button on the iPod unit is pressed, the main unit will
automatically change to iPod function overriding the previous
function selected.
Caution:
● Unplug all accessories for the iPod before inserting it into the
iPod dock.
● Stop button ( ) at main unit is invalid during iPod function.
Various iPod functions
Function Main Remote
unit control
Play
Pause
____
Track up/
down
____
Fast
forward/
reverse
____
Display
____
Repeat
____
Shuffle
____
iPod
Menu
____
iPod
Enter
____
iPod
Cursor
Up/Down
Operation
Press in the pause mode.
Press in the playback
mode.
Press in the playback or
pause mode.
If you press the button in
the pause mode, press the
/ button to start the
desired track.
Press and hold down in the
playback mode.
Release the button to
resume playback.
iPod back light ON.
Press for more than 2
seconds to toggle the video
out display between iPod or
TV.
Press to toggle repeat
mode.
Press and hold down to
toggle shuffle mode.
Press to view the iPod
menu during iPod function.
Press to confirm the
selection.
Press to select the iPod
menu.
E-5

Listening to a CD or MP3/WMA disc

POWER
ON/STAND-BY
CD
USB
TAPE
Disc playback
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CD button on the remote control or FUNCTION
button repeatedly on the main unit to select CD function.
3
Press the OPEN/CLOSE button to open the disc tray.
4
Place the disc on the disc tray, label side up.
5
Press the OPEN/CLOSE button to close the disc tray.
6
Press the / (CD / ) button to start playback. After the
last track is played, the unit will stop automatically.
Notes for CD or MP3/WMA disc:
● When the end of the last track is reached during fast forward,
"END" will appear on the display and CD operation will be
paused. When the beginning of the first track is reached
during fast reverse, the unit will enter the playback mode (only
for CD).
● Rewritable multi-session discs with unfinished writing, can
still be played.
Various disc functions
Function Main Remote
unit control
Pause
Track up/ ____
down
Fast ____
forward/
reverse
MI NI CO MPO NENT S YSTEM
CD-SW440
FUNCTION
POWER
ON/STAND-BY
VOL
Operation
Press in the playback
mode. Press the /
button to resume playback
from the paused point.
Press in the playback or
stop mode.
If you press the button in
the stop mode, press the
/ button to start the
desired track.
Press and hold down in the
playback mode.
Release the button to
resume playback.