Related Manuals for Royal Sovereign RWD-1600B
Summary of Contents for Royal Sovereign RWD-1600B
- Page 1 Owner’s Manual Bottom-Load Water Dispenser RWD-1600B Please read and retain these instructions. Royal Sovereign International, Inc. To register your product, please go to www.royalsovereign.com...
-
Page 2: Table Of Contents
Thank you for purchasing the Royal Sovereign Bottom-Load Water Dispenser, RWD-1600B. This manual will provide you with safety information, instructions for optimal use, and proper care and maintenance for your product. Please read this manual carefully before operating. CONTENTS ................3 - 4 SAFETY INSTRUCTIONS ................ -
Page 3: Safety Instructions
SAFETY INSTRUCTIONS When using this appliance follow these safety precautions to reduce the risk of fire, electric shock, or injury. WARNING Electrical Safety Keep this appliance away from high temperatures and in a dry / ventilated place. Never install this appliance in the open air, under rain, or direct sunlight. For your safety, this appliance should be properly grounded on a level surface indoors. - Page 4 SAFETY INSTRUCTIONS When using this appliance follow these safety precautions to reduce the risk of fire, electric shock, or injury. CAUTION Operating Safety A full water bottle must be connected to the appliance prior to being turned on (See Page 6). Pour water from the hot water faucet before plugging in and switching the appliance on to hot water.
-
Page 5: Product View / Set - Up
PRODUCT VIEW Hot Water Button & Child Safety Lock Room Temperature Water Button Cold Water Button Cold Power Switch (Green) Indicator Lights Hot Power Switch (Red) Condenser Power Cord Drip Tray Water Bottle Cap Reset Button with Hose Drain Plug Cabinet Door Water Bottle (Not Included) -
Page 6: Product Operation
PRODUCT OPERATION BEFORE PLUGGING IN THE UNIT TO A POWER SOURCE: 1. Let the appliance stand upright for about 24 hours. This will reduce the chance of malfunction in the cooling system from possible mishandling during delivery. WARNING: The drain cap on the back of the unit may become loose during shipping. Fasten the drain cap tightly before you start to operate the unit. - Page 7 PRODUCT OPERATION 1. Place the water dispenser on a level surface. Plug the water dispenser into a grounded power outlet. 2. First, turn the Hot Water switch on the back of the unit into the ON position. Next, turn the Cold Water switch into the ON position.
- Page 8 PRODUCT OPERATION When operating the water dispenser for the first time, you will need at least 15-30 minutes for the hot water to reach the desired temperature and 1 hour for the cold water to reach the desired temperature. The water dispenser has 3 indicator lights on the front panel. •...
-
Page 9: Machine Maintenance
MACHINE MAINTENANCE WARNING: Before cleaning, turn the power switch off and disconnect the power cord from the wall. Before the first use and after a long period of not using the appliance, the water tank and water pipes should be cleaned. It is recommended to wash and disinfect the system every 3-6 months. -
Page 10: Troubleshooting
The heating and cooling switches may need to be replaced. The heating tank may need to be replaced, because it may be burnt out. • NOTE: For all replacements and repairs that need to be made, contact Royal Sovereign Customer Service at +1) 800-397-1025... -
Page 11: Specifications
SPECIFICATIONS MODEL RWD-1600B Voltage - Frequency 115V – 60 Hz Heating Power / Cooling Power 500W / 85W Hot Tank Capacity / Cold Tank Capacity 2 L (0.53 gal.) per hour / 5 L (1.32 gal.) per hour Bottle Size... -
Page 12: Warranty
Return defective product, in original packaging, to the address below. Royal Sovereign International, Inc. requires reasonable proof of your date of purchase from an authorized retailer or distributor. Therefore, you should keep your receipt, invoice, or canceled check from the original purchase. The limited warranty shall be limited to the repair or replacement of parts which prove defective under normal use and service within the warranty period.