Enhancing Your System - Sharp CD SW340 Operation Manual

Enhancing your system

The connection cord is not included. Purchase a commercially
available cord as shown below.
Portable audio
player, etc.
TIMER
To the line output jack
CD
PHONES
Audio cable
(not supplied)
Listening to sounds of Portable Audio Player,
etc.
1
Connect a Portable Audio Player etc. to the front AUDIO IN
jack.
2
Press the ON/STAND-BY button to turn the power on.
3
Press the AUDIO IN button.
4
Play the connected equipment.
You can enjoy sounds from the supplied speakers.
Note:
To prevent noise interference, place the unit away from the television.
5
4
3
2
1
PLAYBACK (PLAY & STOP) RECORD/PLAYBACK
AUDIO
IN
Auto power on function:
When you press any of the following buttons, the unit turns on.
AUDIO IN button (main unit and remote control): The unit turns
on and the "AUDIO IN" function is activated.
/ button on the main unit: The unit turns on and playback of
the last function starts (CD,TAPE,TUNER,AUDIO IN).
To record sounds of Portable Audio Player, etc.
1
Insert a cassette in the TAPE 2 cassette compartment.
2
Press the AUDIO IN button.
3
Press the button.
4
Press the / button.
5
Play the Portable Audio Player, etc.
Headphones
Before plugging in or unplugging the headphones, reduce the
volume.
Be sure your headphones have a 1/8" (3.5 mm) diameter plug and
impedance between 16 and 50 ohms. The recommended
impedance is 32 ohms.
Plugging in the headphones
automatically. Adjust the volume using the VOLUME control.
disconnects the speakers
TIMER
CD
5
4
3
2
1
PLAYBACK (PLAY & STOP) RECORD/PLAYBACK
AUDIO
PHONES IN
CD-SW340
35