Digitus professional DN-16084-1 Quick Installation Manual

Th is guide is f for quick ins stalling and connecting
ref fer to the Us ser's Manua l of the cam era in the su
Al l-in-One C Cable
No N Cable Pin
1 RJ-45 -
1
Power r (DC 12V / A AC 24V)
2 2 2
(3-pin Terminal B lock)
3
1
Alarm I/O 2
3
(4-pin Terminal B lock) 3
4
Green
4 4 Audio I/O
Pink
5 BNC -
mi icroSD Ca ard Slot / D Default Bu utton
Th e positions of microSD D card slot a and default
ca mera's front t housing, pl lease refer t to section m
mi croSD Card d Slot
Ins sert the micr roSD card in nto the card slot to store
ca mera is pow wered on.
NOTE : It is not rec commended d to record w
suppor rt long term m continuou s data read
inform ation regard ding the relia ability and th
Bullet IP B
DIGITUS D DN-16084-1 Bullet IP C Camera. For r more detai
upplied CD.
Defi nition Rem marks
For network k and PoE co onnections
DC 12V − AC 24V 1
Reserved GND Power c connection
DC 12V + AC 24V 2
Alarm In − A
A Alarm In +
Alarm c connection
Alarm Out − A −
Alarm Out + A +
A Audio Out
Two-wa ay audio tran nsmission
A Audio In / M Mic In
For analog v video outpu t
button are shown as below. For details abo ut how to d
icroSD Card d Slot / Defa ault Button in n the User's
e videos and d snapshots s. Do not rem move the mi icroSD card
with the micr roSD card fo or 24/7 cont tinuously, as s it may not
d/write. Plea ase contact the manuf facturer of t the microSD
he life expec ctancy.
P Came era Quic ck Guid e
ils, please Default B Button
Press the e default bu tton with a p
Camera a Cabling
Please fo ollow the ins structions be
Power C Connection
Please u use a DC 12 2V / AC 24V
power ou utlet. Alterna atively, conn
other end d of the cab le to a Powe
Ethernet t Cable Con nnection
Connect one end of the Etherne
cable to the network k switch or P
NOTE: In so N ome cases, E
PC. P
NOTE: Chec N ck the statu
c check the LA AN connectio
Green Li nk Light ind
Orange A Activity Light
Before Login to t the Camer
A client p program wil ll be automa
camera, please ens sure downlo
plug-ins or setting I nternet's se
supplied CD.
detach the
A ActiveX Co ntrols and
Manual.
Step 1: : Start the I nternet Exp
Step 2: : Select <T Tools> from
browser. T Then click <
Step 3: : Click the < <Security> t
and click <Custom le
settings.
Step 4: : Set "Activ veX controls
<Prompt> or <Enable
Camera a Login
The cam mera is defa ault set as D
camera c can be foun nd via UPnP
detected , then the ca amera would
the came era under fix xed IP addre
d when the
IP Addre ess: 192.168 8.0.100
Subnet M Mask: 255.2 255.255.0
be able to Login ID D and Passw word
 Key in
n the camera a's IP addres
D card for
 Enter
the default u username (a
case s sensitive.
proper tool f or at least 2 20 seconds t to restore th
elow for cab le connectio ons.
V adaptor a and connect it to the 3- pin terminal l block of th
nect the Eth hernet cable e to the RJ-4 45 connecto or of the All-
er Sourcing Equipment (PSE) switc ch.
et cable to t he RJ-45 co onnector of t the All-in-On ne cable, an
PC.
Ethernet cro ossover cabl e might be n needed whe en connectin
us of the lin k indicator a and the act ivity indicato or LEDs. If
on.
icates good network co nnection.
t flashes for network act tivity indicat ion.
ra
atically insta alled to the PC when c onnecting to o the camer
oading the A ActiveX con ntrol is allow wed by eithe er changing
ecurity level to default. For further details, ple ease refer to
Plug-ins Se ettings Inte ernet Secu
plorer (IE). Step 1: Start the In nternet Expl
the main menu of th he Step 2: Select <T Tools> from
Internet Opt tions>. browser. T Then click <I
tab and sele ct <Internet> >, Step 3: Click the < <Security> ta
evel> to cha ange Active eX Step 4: Down the
<OK> to c confirm the s
s and plug- -ins" items t to window,
e>. accessing
DHCP mode e to obtain IP address from the D DHCP serve
P search or please use the search tool from th he CD. How
d switch aut tomatically t to fixed IP a ddress unde er 192.168.0
ess, please s set the IP ad ddress of the e PC as: 19 92.168.0.XXX
ss in the UR RL bar of the e web brows ser window a and hit on "E
admin) and password ( admin) in th he prompt re equest dialo
e system.
he All-in-One e cable and the
in-One cabl le, and plug the
nd plug the o other end of f the
g the camer ra directly to o the
the LEDs a are unlit, ple ease
ra. Before lo ogging in to the
g the Active eX controls and
o the User's s Manual in the
rity Level
orer (IE).
the main menu of t the
nternet Opt tions>.
ab and selec ct <Internet> >.
page, click "Default Le evel" and cl ick
setting. Clos se the brows ser
and open a new o one later for
the IP came era.
r. Under DH HCP mode, the
wever if no D DHCP serve er is
0.250. There efore, to acc cess
X; for examp ple:
Enter".
gue. Note th hat usernam me is