Sharp CD-SW300 Operation Manual page 13

Placing the speaker system
There is no distinction between the right and left speakers.
Left speaker Main unit Right speaker
Subwoofer
Floor
Note:
The speaker grilles are not removable.
AC power connection
After checking all the connections have been made correctly, plug
the AC power cord of this unit into the AC outlet. If you plug in the
unit first, the unit will enter the demonstration mode.
AC INPUT
Notes:
The unit will start the tape initialization when plugged in to the AC
outlet. During this process, initializing sound will be heard and the
unit cannot be turned on. Wait until the process is finished.
Unplug the AC power cord from the AC outlet if the unit will not be
in use for a prolonged period of time.
Cooling fan:
The main unit is built with a cooling fan at the rear of the unit for
improved cooling. Please do not cover the opening of the fan with
any obstacles, as this will block proper ventilation.
AC INPUT
The first time the unit is plugged in, the
unit will enter the demonstration mode.
You will see words scroll and the sub-
woofer will light up in flashing mode.
To cancel the demonstration mode:
When the unit is in the power
Table
stand-by mode (demonstration
mode), press the X-BASS (SUR-
ROUND)/DEMO button. The unit
will enter the low power consump-
tion mode and the subwoofer light
up will be off.
To return to the demonstration mode:
When the unit is in the power stand-by mode, press the X-BASS
(SURROUND)/DEMO button again.
Note:
When the power is on, the X-BASS (SURROUND)/DEMO button can
AC outlet
(AC 120 V, 60 Hz) be used to select the extra bass mode.
Use an outdoor FM antenna if you require better reception. Consult
your dealer.
Note:
When an outdoor FM antenna is used, disconnect the supplied FM
antenna wire.
Demonstration mode
Outdoor FM antenna
ANTENNA
FM GND AM
Outdoor
FM antenna
75 OHMS
75 ohms
coaxial cable
CD-SW300
13