Installation Instructions; Install Cooktop - Samsung NZ30M9880 Series Installation Manual

Installation instructions

Installation instructions

Install cooktop

STEP 1 Prepare installation
Decide on the final location for the cooktop. Avoid drilling or cutting into house
wiring during installation.
Bottom of Cooktop
Foam Tape
Cooktop Glass
STEP 2 Place cooktop
Cooktop
8 English
CHEF-INDU_NZ30M9880_NZ36M9880_DG68-00827B-00_EN+MES+CFR.indb 8
01 Using 2 or more people, place the
cooktop upside down on a covered
surface using the foam end posts from
the packaging.
02 The foam strip helps avoid damage to
the underside of the cooktop glass from
debris and helps the cooktop sit flat on
uneven counters.
Insert the cooktop centerd into the cutout
opening. Make sure the cooktop is parallel
to the front edge of the countertop. Make
final check that all required clearances are
met.
STEP 3-1 Bracket Guide Installing -Main
The bracket Guide can be installed after cooktop is placed into the cutout.
1. Attach bracket guide to bottom of
2. Adjust to match hole of bracket and
3. Tighten screw enough to hold bracket in
4. Using 2 or more people, turn the
Bottom of Cooktop
Make sure that the front edge of the
cooktop is parallel to the front edge of the
countertop. If repositioning is needed, lift
entire cooktop up from cutout to avoid
M4 L10
scratching the countertop.
screw M4 L16 screw
STEP 3-2 Alternative Bracket Guide Installing
1. Attach bracket guide to bottom and
Countertop
2. Tighten screw bracket guide to base of
UNC 24 /
3
16
L75 screw
3. Install UNC 24
Turn the thumbscrew until bracket touches
M4 X L10
Cooktop
the bottom of the countertop. Do not over
screw
tighten.
cooktop and side of wall.
bottom of cooktop.
place when cooktop is placed in cutout.
cooktop right side up and place in
cutout.
NOTE
select bracket location.
cooktop.
/ L75 screw until it
3
16
touches the bottom of the countertop.
2017-07-26 5:06:14