Connecting To Your Kajeet Smartspot; Step 1: Note Wi-Fi Name And Password; Step 2: Power On The Device; Step 3: Connect Your Device - Kajeet SmartSpot T-41 Quick Start Manual

Connecting
To Your Kajeet SmartSpot
Follow the steps below:
1. On the back of the device, note the Wi-Fi name and password on the sticker.
IF STICKER IS MISSING FROM DEVICE: Remove the back battery cover, (see Fig. 1) and
take note of the Wi-Fi name and password shown on the sticker. Replace back cover.
2. Hold the power button down for 3 seconds until all lights are blue.
3. On your computer, tablet, mobile phone, or other
Wi-Fi enabled device, select the Kajeet SmartSpot
Wi-Fi network name (ex. Alcatel LINKZONE ####) from
the list of available Wi-Fi networks on your device.
4. When prompted for a password, enter the
Wi-Fi password from step 1.
5. You should now be connected to the internet.
To view your device's status and data usage, visit
For support with your device please contact your school or district technology department.
Fig. 1
kajeet.com/status
NOTCH