Table of Contents
Advertisement
Shower Operation
ADJUSTING THE WATER TEMPERATURE
The water temperature can be adjusted between 32°C and
the maximum showering temperature setting (47°C), in
1°C increments.
The showering temperature is adjusted using the
TEMP +
and TEMP -
The maximum showering temperature is factory set to 47°C,
but it can be restricted using the maximum temperature
setting in the Configuration Mode (See page 9).
The current temperature setting is shown on the display
screen. When the temperature setting is adjusted,
the display will flash for a short period to indicate the
temperature is being adjusted.
NOTE: When selecting the temperature you want your
shower to be, the display shows the desired temperature.
The actual water temperature delivered will take several
seconds to stabilise depending on your plumbing system.
A default showering temperature can be set in the
Configuration Mode (See page 9). When the default setting
is enabled, the shower will return to that temperature
whenever it wakes from the Sleep Mode. If the default
setting is disabled, the shower will always restart at the
last used temperature setting.
ADJUSTING THE FLOW SETTING
The shower has 10 flow settings.
The flow setting is adjusted using the FLOW +
FLOW -
controls.
The current flow setting is shown on the display screen
A default flow setting can be set in the Configuration Mode
(See page 9). When the default setting is enabled, the
shower will return to that pre-set flow whenever it wakes
from the Sleep Mode. If the default setting is disabled, the
shower will always restart at the last used flow setting.
controls.
and
Current
Temperature
Setting
Current Flow
Setting
7
Hide quick links:
Advertisement
Table of Contents
