Jorvet BUSTER ICU Cage Manual

Advertisement

BUSTER ICU Cage
Instructions for Use
The BUSTER ICU Cages are collapsible
They are portable and can be set up in the prep. room or appropriate site
They fit standard stainless steel kennels
They allow for the provision of oxygen
They allow for the provision of heat
They also allow for the cooling of animals
Can be used as anaesthetic chamber provided a co-axial circuit is used

Contents

Remove all the packaging and check the components
1 x Carry bag
1 x ICU Cage
1 x mat (see sheet BUSTER Kennel Mats)
BUSTER Gel pack(s) small – 1, medium -2, large -4, (see sheet for Activation of Gel Pack)
Oxygen accessories pack
6 x Venturi, nebulizer, T piece, cap 2.1m oxygen tubing
(see sheet Use of Oxygen)
Dimensions
Jorgensen Laboratories
Volume
Weight
55
120

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BUSTER ICU Cage and is the answer not in the manual?

Questions and answers

Dr. Kathleen Deckard
March 27, 2025

What oxygen flow rate should you use when trying to set up the cage. The attachments account for different percentages of oxygen, but we need to know what flow rate will give us the best percentage but also helping us conserve oxygen.

1 comments:
Mr. Anderson
March 27, 2025

The recommended minimum oxygen flow rate for the Jorvet BUSTER ICU Cage is 2 liters per minute.

This answer is automatically generated

Summary of Contents for Jorvet BUSTER ICU Cage

  • Page 1 BUSTER ICU Cage Instructions for Use The BUSTER ICU Cages are collapsible They are portable and can be set up in the prep. room or appropriate site They fit standard stainless steel kennels They allow for the provision of oxygen...
  • Page 2 If over heating occurs or is likely to occur, use the frozen/cooled BUSTER Gel Packs to draw heat away from the animal. Cleaning After use remove the mat from the BUSTER ICU Cage and clean as instructed in the Sheet BUSTER Kennel Mat. Wipe the inside of the cage with disinfectant or parvocide.

Table of Contents