Harbor Freight Tools 54697 Safety Precautions And Instructions

with Clock, Calendar, & Thermometer
Safety Precautions and Instructions
of this instruction sheet or any artwork contained herein may be reproduced in any
shape or form without the express written consent of Harbor Freight Tools.
1. Contains small parts that can be choked upon or swallowed. Keep out of children's reach
2. Aside from the batteries, this item contains no user serviceable or replaceable parts.
3. Use only in an interior, dry, stable area out of direct sunlight.
The warnings, cautions, and instructions discussed in this instruction sheet cannot cover all
possible conditions and situations that may occur. It must be understood by the operator that common
sense and caution are factors which cannot be built into this set, but must be supplied by the operator.
1
Undo the three snaps at the
top of the pencil holder behind
the front panel.
Replace both of the batteries with two new AG-13 (1.5 Volt) type battteries at the same time. Be certain that they
are turned with the positive and negative ends facing in line with the way the unit is marked. Close the battery
cover, replace the screw, and close the snaps.
SAVE THIS INSTRUCTION SHEET.
Pencil Holder
3491 Mission Oaks Blvd./Camarillo, CA 93011
©
Copyright 2004 by Harbor Freight Tools
For technical questions, please call 1-800-444-3353.

Battery Replacement

(Batteries are included.)
snaps
54697
®
®
. All rights reserved. No portion
2
Remove the battery cover
screw. and slide the battery
cover open.
3
(Operation Instructions on Back.)
battery cover
screw