Selecting Titles From The Title Menu Of A Dvd (Dvd Only) - Sharp DV-L70BL Operation Manual

Selecting Titles from the Title Menu of a DVD (DVD only)

Some DVDs have a title menu that you use to select the title you want to play.
BACKLIGHT VIEW
OPERATE
HI/LOW/OFF MODE
DIGITAL
VIRTUAL
GAMMA
TITLE
MENU RETURN
SKIP PLAY
RESUME STOP STILL/PAUSE
DISPLAY REV FWD
CLEAR MEMORY
To select a title from the title menu of a DVD
This function can be used only with a disk that has been played once,
even partially.
1
While the disc is playing or stopped, press TITLE to display its title menu.
2
Use ' and " to select the title you want.
3
Press ENTER or ûPLAY to start play of the selected title.
• Some DVDs use the term "top menu" instead of "title menu".
• Nothing appears on the screen when you press TITLE if the disc you are using
does not have a title menu.
• The procedure shown here provides only general steps. The actual procedure for
using the title menu depends on the disc you are using. See the disc jacket for
details.
• The title menu does not appear immediately after you load a disc into the DVD
player or when the DVD player is in the Standby mode. It appears only after the
disc has been played, even if only partially.
Helpful Hints
• You can also specify a title by inputting a title number with the number buttons.
VIDEO
ADJUST
TITLE
DIGITAL
S.PICTURE
ENTER
ENTER
SKIP
PLAY
SLOW
REPEAT
Number
buttons
PROGRAM
DIRECT
TITLE
PLAY
ENTER
77
GB