Advertisement
Note: if your pager is in mute or motor status, "SET AUDIO?" function will not appear in
function selection items.
4.9. Time setting of mute receiving
You may set mute receiving time for 1 to 10 hours. By the time the pager will give out short
alert and change to sound alert receiving mode. Or set permanent mute receiving until
resetting other alert mode.
This shows permanent mute receiving. Press the setting /selection key
setting or press the function key
It shows 1 hour mute receiving. The pager will give out short alert 1 hour later and enter
sound alert receiving mode. Press the setting /selection key
press the function key
4.10. Alarm setting
Alarm function may be used for everyday alarm or dating reminder.
In "SET ALARM?" function, press the setting /selection key
Press the function key
Press the Setting / selection key
Press the function key
Press the setting /selection key
function key
to adjust the alarm time.
Repeat the above steps in every position to adjust the alarm time.
Press the read / replace key
Alarm icon in standby mode or OFF mode shows an alarm is ON. Alarm icon will not display
when all alarm released.
PG-2091F
USER MANUAL
or
to enter next option.
to enter next option
to select from alarm 1 , 2 or 3.
to confirm your selection.
to select turning the alarm ON/ OFF.
to move to the position needed changing, then press the
to confirm your alarm setting.
VER:NEW ISSUE
to confirm this
to confirm this setting or
to enter alarm setting mode.
10 OF 11
Advertisement
