Addvalue Communications BluePendant BP100 User Manual

Neckwear mode

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

FCC INFORMATION

FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference, and (2)

this device must accept any interference received, including interference that may

cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following

measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

-- Consult the dealer or an experience radio/TV technician for help for help.

Any changes or modifications not expressly approved by the party responsible

for compliance could void the user's authority to operate the equipment.

No special accessory is required to enable the equipment to comply with the

emission limits.

Table of Contents

Need help?

Do you have a question about the BluePendant BP100 and is the answer not in the manual?

Questions and answers

Summary of Contents for Addvalue Communications BluePendant BP100

Page 1 FCC INFORMATION FCC Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 2: Table Of Contents
Contents Unpacking Contents Getting Started • Power On/Off • Pairing Process • Pairing to a Mobile Phone • Deleting Pairing Information • Modes Using Your BluePendant • Incoming Call • Outgoing Call • Call Waiting • Voice Control • Volume Control Charging •...
Page 3: Unpacking Contents
Unpacking Contents Your package should have: • BluePendant BP100 (Fig 1) • Power Adaptor (Fig 2) • Rechargeable Battery (Fig 3) Fig 1 : Picture of Connecting Earpiece & Mic from Power / Volume Button the BluePendant (PWR / VOL )
Page 4: Getting Started
Getting Started Before the BluePendant can be used for the first time, the BluePendant battery must be charged with the supplied power adapter according to steps found in page 12 for Charging. Power ON / OFF • To Power ON, press and hold PWR/VOL button until a BEEP is heard in the BluePendant earpiece.
Page 5: Pairing Process
Pairing Process Before the BluePendant can be used, it must be paired with a Bluetooth-enabled mobile phone. There is no need to pair the BluePendant again unless the pairing information has been deleted from the mobile phone. Pairing to a Mobile Phone •...
Page 6: Deleting Pairing Information
• Once pairing is completed, BluePendant PASSKEY or the indicator light will flash PIN CODE Bluetooth Blue once every 2 seconds. Headset Model: BP100 • The BluePendant is now in Standby mode and is ready PIN:12345 to accept or initiate calls. Deleting Pairing Information •...
Page 7: Modes
Modes • Pairing mode - Indicator light alternating Blue and Orange - BluePendant is ready for pairing to Bluetooth-enabled phone • Standby mode - Indicator light flashes Blue once every 2 seconds - BluePendant ready to accept/initiate calls • Call mode - Indicator light shows a steady Blue - BluePendant has either accepted or initiated a call •...
Page 8: Using Your Bluependant
Using Your BluePendant Once the BluePendant is paired to the mobile phone, it can now accept or initiate calls as long as it is within range of approximately up to 10m (30ft) outdoor, or up to 5m (15ft) indoor. Incoming call Depending on the mobile phone, calls can be received through the BluePendant or through the mobile phone.
Page 9: Outgoing Call
• If the BluePendant loses connection during a call, press and hold the BluePendant CALL button for 2 seconds to re-establish connection. A series of BEEPS can be heard in the BluePendant earpiece when it attempts to re-connect to the mobile phone. Outgoing call Depending on the mobile phone, calls can be received through the BluePendant or through the mobile phone.
Page 10: Call Waiting
• If the BluePendant loses connection during a call, press and hold the BluePendant CALL button for 2 seconds to re-establish connection. A series of BEEPS can be heard in the BluePendant earpiece when it attempts to re-connect to the mobile phone. Call Waiting The Call waiting function is available if the mobile phone supports it and if call waiting services has been subscribed.
Page 11: Volume Control
• Press and hold the CALL button for 2 seconds and a series of BEEPs can be heard as the BluePendant attempts to connect to the mobile phone. • Once the connection is made, the BEEPs will stop and the Voice Control function can be operated in the usual way.
Page 12 If the mobile phone supports remote volume control, the BluePendant will adjust the mobile phone volume only. If the mobile phone does not support remote volume control, the volume has to be adjusted on the BluePendant itself. Using Your BluePendant...
Page 13: Charging
Charging Connect the power adapter only to designated power sources as marked on the power adapter. The BluePendant is powered by a rechargeable battery. It is recommended that the battery be charged with the provided power adapter. • Plug the power adapter into the BluePendant power jack. •...
Page 14: Low Battery
Low Battery • 3 long BEEPs can be heard in the earpiece when the battery power is low and requires re-charging soon. • The indicator light will flash Orange, once every 2 seconds. • The BluePendant will be automatically switched OFF after some time if it is not recharged.
Page 15: Troubleshooting
Troubleshooting No sound contact between BluePendant and phone The BluePendant and the phone have to be paired to recognize each other. Please refer to the Pairing Process of the BluePendant User’s Guide on how to pair the mobile phone to the BluePendant.
Page 16 There are 2 reasons why the BluePendant might be switched off automatically: • The battery is too low. The indicator light on the BluePendant will flash Orange and 3 continuous BEEPs could be heard. • The BluePendant has been exposed to extreme temperatures. Leave the BluePendant in room temperature for a while and turn it on again.
Page 17 Changing Battery Batteries, because of their chemical nature, have a limited life span. If the operating time of the BluePendant is significantly shorter than what it usually was, it could be that the BluePendant’s re-chargeable battery is reaching the end of its limited life span. It is time to change the BluePendant’s re-chargeable battery.
Page 18 Additional Information Addvalue Consumer website: www.addvaluetech.com/consumers Before using the BluePendant, check for any exceptions, due to national requirements or limitations that may limit or prohibit usage of Bluetooth equipment. Product Usage • Do not attempt to disassemble the BluePendant. Any unauthorized alterations, modifications or disassembly of the BluePendant will automatically result in loss of product warranty.
Page 19 • Radio Frequency (RF) energy may affect some electronic systems. Most modern equipment is shielded from RF energy. However, certain electronic equipment is not. Therefore, permission is necessary when intending to use the BluePendant near or within the vicinity of medical equipment and other electronic equipment.
Page 20 Limited Warranty The warranty period is twelve (12) months from the date of purchase. Save the original receipt as it is needed for warranty repair claims. Should the BluePendant need warranty service, please return it to the dealer from whom it was purchased or visit www.addvaluetech.com/consumers to get further information.
Page 21 batteries which by their nature have a limited lifetime, and breakage or damage to the connecting earpiece, microphone or lanyard) unless the defect was caused directly by defects in materials, design or workmanship. Or if the Product PIN code or serial number has been removed, erased, defaced, altered or is illegible.
Page 22 BluePendant BP100 Bluetooth Technology User’s Guide...
Page 23 Languages Menu English Deutsch Français Italiano Español...
Page 24 0682 DECLARATION OF CONFORMITY We, Addvalue Communications Pte Ltd of 750D Chai Chee Road #03-03 Technopark @ Chai Chee Singapore 469004 Declare that the product, Type : Bluetooth Headset, Neckwear Model Trade Name : BluePendant Model No. : BP100 is in conformity with the following standards: ETSI EN 300 328-1 &...