Table of Contents
Advertisement
4.
Optional 3,5mm jacks and ZX96 bus diodes
If needed additional 3,5mm jacks can be soldered on the MrX sound card on J1 and J2.
For the ZX96 bus
(http://www.fischerkai.de/zxteam/treib_e.htm )
a diode DX1 for the /BUSCS
signal has to be soldered and the port connector has to be exchanged by a VG64 connector. The
VG64 connector uses all pins of K2.
Note: The ZX96 bus is only used by some freaks, if your ZX81 is equipped with the same the
original MrX won't fit mechanically.
Version: v005
7
Date: 22.05.2012
Advertisement
Table of Contents
