Download Print this page

Specifications; Safety Warnings And Precautions - Harbor Freight Tools 90787 Assembly And Operating Instructions

Lathe dust collection hood

Advertisement

You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
WARNING: When using Product, basic safety precautions should always be followed
to reduce the risk of personal injury and damage to equipment.
Read all instructions before using this Product!
1.
Keep work area clean. Cluttered areas invite injuries.
2.
Observe work area conditions. Do not use the Dust Hood in damp or wet locations.
Don't expose to rain. Keep work area well lighted.
3.
Keep children away. Children must never be allowed in the work area. Do not let
them handle or play with the Dust Hood.
4.
Store idle equipment. Always keep out of reach of children.
5.
Use the right product for the job. Do not attempt to force a small product or
attachment to do the work of a larger industrial Product. There are certain applications
for which this product was designed. It will do the job better and more safely at the
rate for which it was intended. Do not modify this product and do not use this product
for a purpose for which it was not intended.
6.
Dress properly. Do not wear loose clothing or jewelry as they can be caught in
moving parts. Protective, electrically non-conductive clothes and non-skid footwear
are recommended when working. Wear restrictive hair covering to contain long hair.
7.
Use eye protection. Always wear ANSI approved impact safety goggles during set-
up.
8.
Do not overreach. Keep proper footing and balance at all times. Do not reach over
or across running machines.
9.
Maintain products with care. Keep the Dust Hood clean for better and safer
performance.
SKU 90787
90787.p65
2

Specifications

Hood Overall Dimensions
Shield Dimensions
Hose Flange Diameter
Fasteners Included: Two Dome Headbolts, Two Wing Nuts with Washers.
Save This Manual

Safety Warnings and Precautions

8-3/4" L x 8-1/2" W X 7-1/2" H
9-1/2" L x 5-1/4" W x 1/8" Thick
3-7/8" OD.
Page 2
10/21/03, 3:03 PM

Advertisement

loading