Spectrum 3D2GO Assembly Instructions Manual page 2

• Read this owner's manual before assembly or operation.
• Do not allow children to operate.
• For indoor use only. Do not install or store where it will be exposed to moisture.
• Do not block the ventilation openings.
• Do not allow anyone to sit, stand, or climb on the unit.
• Use a damp, soft-cloth, or sponge, with mild soap or detergent solution to clean
dirty surfaces. Do not use harsh solvents or abrasives.
• This unit is intended for institutional use. It does not have any user-serviceable
parts or user-maintenance requirements. If servicing is necessary, please
contact Spectrum Industries for assistance.
Warning - Relocating audio and/or video equipment to furniture not specifically
designed to support audio and/or video equipment may result in death or
serious injury due to the furnishing collapsing or over turning onto a child.
Warning - Death or serious injury may occur when children climb on audio
and/or video equipment furniture. A remote control or toys placed on the
furnishing may encourage a child to climb on the furnishing and as a result
the furnishing may tip over on to the child.
Worksurface Option
(1) Worksurface-plain - 0134251 (1) Worksurface with surround - 0134984
(2) 0116530
Cord Wrap
(4) 0101382
#14 x 7/8"
PHSM
(2) 0135884 - Glide-length leg
(4) 037779 - 5/16-18 Glide
Important Safety and Care Instructions
Note: Depending on configuration ordered, not all components below may be included.
(1) 039622
2" Grommet Cover
(4) 0190564
1/4-20 x 2-1/2"
PHMS
Leg Option
(2) 0133958 - Caster-length leg
(4) 0190100 (4) 050033
5" Balloon 4" Heavy-Duty
Wheels (BW) Casters (HD)
(16) 041943
1/4-20 Locknut
(16) 026064
1/4-20 x 5/8" PHMS
• Keep the power switches in the OFF position before plugging or unplugging
from the wall outlet.
• Turn OFF the devices before plugging them in.
• Ensure total device / equipment load does not exceed 12-amps.
• Do not plug the power cord into an extension cord.
• Inspect the power cords for damage before each use. Do not use power
cords that are damaged.
• Unplug power cord from electrical outlet by gripping the cord. Do not unplug
the power cord by pulling only on the cord.
• Do not step on, drive over, drag, or place objects on the power cord.
• For added safety, plug the cart into a grounded outlet controlled by a GFI
(Ground Fault Interrupter) circuit breaker.
• Damaged electrical components can create significant hazards to users
and is not covered by the warranty. Repairs should always be performed by
a qualified electrician.
• Electrical devices are not toys. Children are often unaware of the hazards
associated with electrical devices. This unit must always be used by adults
or with adult supervision.
Components
(1) 0135039 - Cover
Cart Hardware
(12) 026064
1/4-20 x 5/8"
PHMS
(1) 0133970 - Rear bracket
(1) 0133982 - Steel Panel
Electrical Safety:
Electrical Option
(1) 0190043 -
(1) 0190047 - 8' IEC
Power Switch
Power Cord
(1) 059984
2" Grommet
(4) 0106543
1/4-20 Keps
Nut
(1) 0133969 - Front bracket
0190572R2 Page 2 of 6
(1) 051070
Clip
(3) 026057
#10 x 3/4"
PHSM