Table of Contents
Advertisement
Quick Links
1/4 HP POR
1/4 HP POR T T T T T ABLE
1/4 HP POR
1/4 HP POR
1/4 HP POR
ASSEMBLY AND OPERATING INSTRUCTIONS
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at http://www.harborfreight.com
Copyright© 2002 by Harbor Freight Tools
manual or any artwork contained herein may be reproduced in any shape or
form without the express written consent of Harbor Freight Tools.
For technical questions and replacement parts, please call 1-800-444-3353
CEMENT MIXER
CEMENT MIXER
CEMENT MIXER
CEMENT MIXER
CEMENT MIXER
ABLE
ABLE
ABLE
ABLE
®
. All rights reserved. No portion of this
Advertisement
Table of Contents
Summary of Contents for U.S. General 47558
- Page 1 1/4 HP POR 1/4 HP POR T T T T T ABLE 1/4 HP POR ABLE ABLE ABLE 1/4 HP POR 1/4 HP POR ABLE CEMENT MIXER CEMENT MIXER CEMENT MIXER CEMENT MIXER CEMENT MIXER ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com ®...
-
Page 2: Specifications
Dress properly. Do not wear loose clothing or jewelry as they can be caught in moving parts. Protective, electrically non-conductive clothes and non-skid footwear are recommended when working. Wear restrictive hair covering to contain long hair. SKU 47558 Page 2... - Page 3 (up to 50 feet), with wire size rated at 18 AWG. Longer extension cords require larger size wire. If you are using the tool outdoors, use an extension cord rated for outdoor use. (signified by “WA” on the jacket). SKU 47558 Page 3...
- Page 4 Attach the Axle Bracket (28) to the Stand Bracket (26) using Hex. Bolt (19) and Spring Washer (6). See photo B on the next page. Tighten Securely. Place each Wheel (30) on the Axle Bracket (28) axle and secure by snapping in the Set Washer (23) over the axle. SKU 47558 Page 4...
- Page 5 Adjusting Handle. See photo D. Mount the Motor Mount Plate (32) and Motor (33) to the Axle Bracket using Hex. Bolts (31), Set Washers (21), and Hex. Nuts (22). Tighten Securely. See Assembly Drawing. SKU 47558 Page 5...
- Page 6 15. Place the Belt (44) onto the Drive pulley (42), then the motor Pulley (47). 16. Since the Motor mount is loose, move the Motor to align both pulleys, eliminating excess wear on the Belt. SKU 47558 Page 6 REV 12/02...
- Page 7 (4), Set Washer (5), Spring Washer (6), and Hex. Nut (7). Do this with the Mixer Blade upper mounting hole. Repeat this step for the other two Mixer Blades. See photo G. (2), (4), (5), (6), (7) SKU 47558 Page 7...
-
Page 8: Operation
1/4 inch to indicate correct tension. Add several drops of a light oil to the Pivot Brackets oil hole (at top) during each use, as the Drum is turning. Periodically recheck all nuts, bolts, and screws for tightness. SKU 47558 Page 8... -
Page 9: Parts List
SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. SKU 47558 Page 9... -
Page 10: Assembly Drawing
Assembly Drawing SKU 47558 Page 10...
Need help?
Do you have a question about the 47558 and is the answer not in the manual?
Questions and answers