Advertisement
Save tHiS manual
Keep this manual for the safety
warnings and precautions, assembly,
operating, inspection, maintenance and
cleaning procedures. Write the product's
serial number in the back of the manual
near the assembly diagram (or month and
year of purchase if product has no num-
ber). Keep this manual and the receipt in
a safe and dry place for future reference.
impOrtant SaFetY
inFOrmatiOn
in this manual, on the labeling,
and all other information
provided with this product:
this is the safety alert
symbol. it is used to alert
you to potential personal
injury hazards. Obey all
safety messages that
follow this symbol to avoid
possible injury or death.
general Safety rules
Warning read all safety
warnings and instructions.
Failure to follow the warnings and
instructions may result in electric
shock, fire and/or serious injury.
Save all warnings and
instructions for future
reference.
Save tHeSe inStruCtiOnS
1.
Work area safety
a.
Keep work area clean and well
lit. Cluttered or dark areas invite
accidents.
b.
Keep children and bystanders away
while operating. Distractions can
cause you to lose control.
SKU 65533
For technical questions, please call 1-800-444-3353.
2.
electrical safety
a.
Do not expose tools to rain or wet
conditions. Water entering a tool
will increase the risk of electric
shock.
b.
Do not abuse the cord. Never
use the cord for carrying, pulling
or unplugging the tool. Keep cord
away from heat, oil, sharp edges
or moving parts. Damaged or
entangled cords increase the risk of
electric shock.
3.
personal safety
a.
Stay alert, watch what you are
doing and use common sense
when operating.
b.
Dress properly. Do not wear loose
clothing or jewelry. Keep your
hair, clothing and gloves away
from moving parts. Loose clothes,
jewelry or long hair can be caught
in moving parts.
4.
tool use and care
a.
Do not use the tool if the switch
does not turn it on and off. Any tool
that cannot be controlled with the
switch is dangerous and must be
repaired.
b.
Disconnect the plug from the
power source before making any
adjustments, changing accessories,
or storing tools. Such preventive
safety measures reduce the risk of
starting the tool accidentally.
c.
Check for misalignment or binding
of moving parts, breakage of
parts and any other condition that
may affect the tool's operation. If
damaged, have the tool repaired
before use. Many accidents are
caused by poorly maintained tools.
5.
Service
a.
Have your tool serviced by a
qualified repair person using only
Page 2
Advertisement
