Table of Contents
Advertisement
12.
Avoid accidental starting. Be sure the Power Switch is off before plugging
in. Carrying power tools with your finger on the Power Switch, or plugging in
power tools with the Power Switch on, invites accidents.
13.
Remove unneeded accessories before turning the power tool on. An
unneeded accessory that is left attached to the power tool may result in
personal injury.
14.
Do not overreach. Keep proper footing and balance at all times. Proper
footing and balance enables better control of the power tool in unexpected
situations.
15.
Use safety equipment. Always wear eye protection. Dust mask, non-skid
safety shoes, hard hat, or hearing protection must be used for appropriate
conditions.
16.
Hold the vacuum firmly by hand when using it to maintain maximum control.
17.
Do not force the vacuum. Use the correct tool for your application.
The correct tool will do the job better and safer at the rate for which it is
designed.
18.
Do not use the vacuum if the Power Switch does not turn it on or off.
Any tool that cannot be controlled with the Power Switch is dangerous and must
be replaced.
19.
Disconnect the Power Cord Plug from the power source before making any
adjustments, changing accessories, or storing the vacuum. Such preventive
safety measures reduce the risk of starting the tool accidentally.
20.
Store idle tools out of reach of children and other untrained persons. Tools
are dangerous in the hands of untrained users.
21.
Maintain tools with care. Properly maintained tools are less likely to bind and
are easier to control. Do not use a damaged tool. Tag damaged tools "Do not use"
until repaired.
22.
Check for misalignment or binding of moving parts, breakage of parts, and
any other condition that may affect the tool's operation. If damaged, have
the tool serviced before using. Many accidents are caused by poorly main-
tained tools.
SKU 91791
For technical questions, please call 1-800-444-3353.
TOOL USE AND CARE
Page 4
Advertisement
Table of Contents
