Care And Maintenance; Troubleshooting; Service Information; One-Year Limited Warranty - Black + Decker BFMAKB2 Instruction Manual

28 led barflex 360 area light
Table of Contents

Advertisement

Available languages

Available languages

• Press again for medium intensity.
• Press a third time for to turn the light off.
• Press and hold the light mode pushbutton for about five seconds for flashing LEDs.
Adjusting the pivot tube
The pivot tube allows the light to be tilted backward and forward to direct the
illumination upward or downward.
CAUTION: TO REDUCE THE RISK OF PRODUCT DAMAGE:
• Do not attempt to "force" the pivot tube beyond its maximum angle.
• The pivot tube was designed to tilt forward and backward only.
• The pivot tube was designed to be used when the unit is hanging or attached to a
surface using its magnetic base. Using it when the unit is placed on a level, non-
metallic surface may cause the light to fall over and sustain damage.
• NEVER attempt to rotate the light tube itself. Always use the pivot tube to adjust the
area of illumination.
Using the hanging hook and magnetic base
The hanging hook and magnetic base allow you to position the light for convenient,
hands-free operation. The hanging hook rotates 360° to direct illumination as needed.
CAUTION: TO REDUCE THE RISK OF PRODUCT DAMAGE:
• When light is hung by the hanging hook or attached using the magnetic base, do not
shake the light or object that it is hanging from or attached to. Do not hang the light
from or attach the light to any electrical wires or anything that it is not secure.
• Only use the hanging hook for hanging the light. The hanging hook is not intended
to support additional weight. Do not attach or hang anything additional to the light or
risk of breakage may occur.

CARE AND MAINTENANCE

Never submerge the unit in liquids of any kind. If the unit gets dirty, gently clean the
outer surfaces of the closed body casing with a soft cloth moistened with a mild
solution of water and detergent.
Except for the batteries, there are no user-serviceable parts inside. Contact the
manufacturer if any components have become worn or broken.
BFMAKB2_ManualENSP_072715.indd 6-7
6

Safe Battery Disposal

Refer to the Safety Warnings in the front of this Instruction Manual when selecting
and replacing batteries. Always dispose of used batteries properly.
WARNING: TO REDUCE THE RISK OF INJURY/EXPLOSION:
• Do not dispose of batteries in fire as this may result in an explosion.
• Do not expose the unit containing batteries to fire or intense heat as it may explode.

TROUBLESHOOTING

Problem
Solution
Light will not operate
1. The base cover screw may be loose. Screw the
base cover screw clockwise to secure. Do not
over-tighten.
2. The batteries may be completely discharged.
Replace the batteries following the directions
given in this manual.
3. If the light does not operate after replacing
the batteries, contact manufacturer at
877-571-2391.
ACCESSORIES
Recommended accessories for use with this unit may be available from the
manufacturer. If you need assistance regarding accessories, please contact
manufacturer at 1-877-571-2391.
WARNING: The use of any accessory not recommended for use with this
appliance could be hazardous.

SERVICE INFORMATION

Whether you need technical advice, repair, or genuine factory replacement parts,
contact the manufacturer at 877-571-2391.

ONE-YEAR LIMITED WARRANTY

The manufacturer warrants this product against defects in materials and workmanship
for a period of ONE (1) YEAR from the date of retail purchase by the original end-user
purchaser ("Warranty Period").
7
7/27/2015 4:32:30 PM

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents