SOtM mBPS-d2s Operating Instructions

mBPS-d2s Operating Instructions
Please read the operating instruction carefully before you use the product.

Precautions

Do not attempt to disassemble or modify the product.

Keep the product away from the external shocks or vibrations.

Do not use the damaged or peeled cables.

Please use the standard power cable which obtains as a standard accessory.

The heat sink should not be blocked when you use the product.

Do not use the unit outdoors.

Please use the designated external power supply unit with the product if you need.

Please power/turn off the product when you need to connect or disconnect the cables.

Product specifications and features are subject to change without notice.


Warranty Information

Free warranty service
 In case of the defect is found caused by the design or the production flaw while using the device properly, a manufacturer is responsible for the faulty product and the free
warranty service for 1 year from the date of purchasing.
 Even in the warranty service period, malfunction or damage of products caused by the inevitable incident such as a natural disaster is not subject of the free warranty service.
Warranty service at a cost
 The product that free warranty service period is expired..
 Malfunction of the product caused by a user's fault.
 Malfunction of the product caused by incidents.
 Malfunction of the product caused by a natural disaster such as earthquake, flood, lightning & etc.
 In case of the warranty service at a cost, a customer should cover the transportation costs.
Sample of a user's fault
 In case of attempts to disassemble or modify the device
 In case of not following the instructions on this manual.
Please read this instructions and Q&A board on our website carefully before asking for the warranty service.

Product specification

Power input : 5.5mm x 2.1mm DC jack

- Voltage : 9Vdc
- Current : 2A
Power output : 5.5mm x 2.5mm DC jack

- Battery output voltage : 6.5Vdc ~ 8.4Vdc
- Output voltage Range : 6Vdc ~ 9Vdc
- Current : 1.5 A
Battery charge

- Charging current : 1A
- Charging voltage : 8.4 Vdc
- Max charging time : 6 hour
- Battery protection auto recovery
Rev 1.1
Protection

- Input over current
- Output short
- Battery over voltage
- Battery under voltage
Dimension

- Width : 105mm
- Height : 53mm
- Depth : 150mm
(except for the switch & protrusion parts)
Weight

- 700g