Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for VOCOlinc PM2/E
Summary of Contents for VOCOlinc PM2/E
- Page 1 PM2/E Smart Power Strip...
-
Page 2: Product Overview
Product Overview: PM2/E smart Wi-Fi power strip can be controlled through Wi-Fi wireless network. You can switch on/off each outlet and monitor its status wirelessly. The built-in power meter in outlet C (PM2 only) allows you to track power consumption of a specific light or appliance on the LinkWise App. -
Page 3: What's Included
OTA in Progress Flashing slowly OTA done Flashing slowly then light on What’s Included: PM2/E Smart Wi-Fi Power Strip Quick Start Guide Key Features: 3 independent smart outlets and LED indicators 2 x USB charging ports 1 x Qualcomm Quick Charge 3.0 USB port – (available with PM2 only) Energy monitoring (outlet C) –... - Page 4 1. Download and open the free VOCOlinc LinkWise app from the App Store (Apple App Store or Google Play). 2. Plug PM2/E into a desired outlet. Press & Hold the Reset Button for about 5 seconds, the Wi-Fi Connection LED will start blinking blue to indicate it is ready for network setup.
- Page 5 7. You can assign a name to your device and use this name when speaking to Siri. For example, you can name your device “printer”, then wake up Siri and speak “Turn on the Printer”. 8. Set up customized scenes to control multiple devices with a single command. For example, if you assign the “I’m going to bed”...
- Page 6 3. Open Alexa App and enable VOCOlinc Alexa skills using the same account info.
- Page 7 4. Discover PM2/E (it will show all 3 outlets) in the Alexa App, and then follow the steps to complete setup. If you change the name of the device in LinkWise App, you may sync the new name in Alexa App by re-discovering devices.
-
Page 8: Timer Settings
Timer Settings You may schedule to turn on/off the device at specific times on specific days of the week, or to slowly wake you up in the morning. Go to LinkWise APP > Long press the device icon to enter the menu > Look for “Timer” > Go to settings to create an event >... - Page 9 To reset it to factory defaults, press & hold reset button for about 5 seconds. Firmware Update To gain better experience with PM2/E, we strongly recommend that you update the firmware whenever updates with all the latest improvement and fixes are available: 1.
- Page 10 2. Unstable network signal could cause disconnection of the device. Wait for about 2 minutes for automatic re-connection. If the connection does not resume after a while, power off PM2/E and then put it back on. It shall re-connect automatically.
-
Page 11: Legal Information
Legal Information Apple, iPad, iPad Air, iPhone, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. HomeKit is a trademark of Apple Inc. Use of the Works with Apple HomeKit logo means that an electronic accessory has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards. - Page 12 LinkWise APP Scan QR Code Scan QR Code Setup code www.vocolinc.com...
Need help?
Do you have a question about the PM2/E and is the answer not in the manual?
Questions and answers