Basic Adjustment Settings; Menu Operation Buttons; On-Screen Display - Sharp Aquos LC-46D92U Operation Manual

Basic adjustment settings

Menu operation buttons

Use the following buttons on the remote control to
operate the menu.
Press to open or close the menu screen.
MENU:
a / b / c / d : Press to select a desired item on the
screen or adjust a selected item.
ENTER: Press to go to the next step or complete
the setting.
RETURN: Press to return to the previous step.
: Select : Enter
ENTER RETURN
The bar above is an operational guide for
the remote control. The bar will change in
accordance with each menu setting screen.
22
: Back : Exit
MENU

On-Screen Display

Example
Option
Audio Only
Digital Noise Reduction [Off]
Input Select [VIDEO]
Output select [Fixed]
Color System [Auto]
Caption Setup
Program Title Display [No]
1 Item displayed in yellow
• This indicates the item currently selected.
• Press ENTER to go to the adjustment screen for
this item.
2 Item in brackets
• This indicates the current setting for the item.
3 Item displayed in white
• This indicates an item can be selected.
4 Item displayed in grey
• This indicates that the item cannot be selected.
There are various reasons why items cannot be
selected, but the main reasons are as follows:
— Nothing is connected to the selected input terminal.
— The function is not compatible with the current input
signal.
NOTE
• Menu options differ in the selected input modes, but the
operating procedures are the same.
• The screens in the operation manual are for explanation
purposes (some are enlarged, others cropped) and may
vary slightly from the actual screens.
1
2
3
4