TEKK Trainer Assembly Manual

trainer
Congratulations on your new Tekk
of your new Tekk Trainer. Note: It is very important that you follow the instructions to ensure
®
a quick and easy set-up of your Tekk
Have fun! We here at Tekk
the same equipment used by the pros.

Parts:

4 Locking Pins
A Unfold Tekk
1
1 Place Trainer on the ground with Tekk
2,3 Pull and swing Tekk
(Top corners of Tekk
B Raise Tekk
1
1 Raise Tekk Trainer leg up 90 degrees.
®
2 Lower support bracket.
3 Align support bracket with holes on post and insert the locking pin into support bracket.
Support bracket locking pins should be inserted into the 5th hole from the lanyard
during first time set-up. Repeat for the other side of the goal.
4 Raise Tekk Trainer upright.
®
5 Insert locking pins into the top corner brackets. (Locking pins should be inserted from the
front side of the Tekk
ASSEMBLY MANUAL
Trainer! This assembly manual will guide you through the set-up
®
hope you will love practicing with your new Tekk
®
2 Stakes
Net
Trainer Frame
®
2
Trainer arms open.
®
Trainer should look like #4, NOT #5)
®
Trainer Legs & Lock
®
2
Trainer out through the back side of the Tekk
®
Trainer.
®
Trainer Frame
3
logos facing down.
®
3
Trainer and enjoy using
®
32 Large Bungees -
Rebounder Tube
attached to frame
4
4
Trainer.)
®
Allen Key
5
5
Locking Pin
1