Table of Contents
Advertisement
Control Panel Functions
SOURCE
AUTO/SET Button
Power Button
Power Indicator
Buttons
Use this button to select or adjust functions in the On
Screen Display.
Use this button to make D-Sub or DVI connector
active.This feature is used when two computers are
connected to the display.The default setting is D-
Sub.
Use this button to select an icon in the On Screen
Display.
AUTO IMAGE ADJUSTMENT
When adjusting your display settings, always press
the AUTO/SET button prior to entering the On Screen
Display(OSD). This will automatically adjust your
display image to the ideal settings for the current
screen resolution size (display mode).
The best display mode is
17 inch:1280 x 1024
Use this button to turn the display on or off.
The indicator lights up as blue when the display is
operating normally (On Mode). If the display is in Sleep
Mode (Energy Saving), this indicator changes to flicker.
8
Advertisement
Table of Contents
