Specifications - Campbell Hausfeld XT002000 Operating Instructions Manual

For best output, maintain pressure at the tool of 90 PSI.
◆
The longer your air hose the greater the pressure drop from compressor to tool.
◆
If you are using a hose longer than 50 feet, consider upgrading to a 1/2 inch ID air
hose to ensure proper tool pressure.
Failure to lubricate and maintain your air tools properly will dramatically shorten
◆
their life. Use oil every time you use your air tool to lubricate, clean and inhibit rust
in one step. Campbell Hausfeld sells air tool oil under part number ST1270.

SPECIFICATIONS

Maximum PSI
CFM under load 100% duty
CFM no load 100% duty
SCFM under load 100% duty
SCFM no load 100% duty
Air Compressor Recommendation
Max Torque
Working Torque
Rated RPM (free speed)
Impact Speed (IPM)
Variable Speed
Reverse
Forward
Impact Mechanism Type
Bolt Capacity
Anvil
Air Inlet
Minimum Hose Size
Housing Material
Tool Weight
Tool Length
Tool Width
Tool Height
BEST PRACTICES
2
XT002000
90 PSI
3.4 CFM @ 90 PSI
5.4 CFM @ 90 PSI
24.4 SCFM @ 90 PSI
38.8 SCFM @ 90 PSI
8 gallon
750 Ft. Lbs.
0 - 400 Ft. Lbs.
8,500
1,200
Yes
1
3
Twin Hammer
7/8 inch
1/2 inch
1/4 inch NPT (F)
3/8 inch
Composite
5.2 Lbs.
7-3/4 inch
3 inch
7-1/2 inch