Page 2
OPERATOR’S MANUAL JDI-5DP Handle Safety Valve Pressure Gauge Level Indicator Wheels Operation: 1. Remove the cap A and fill the tank with oil no more than the maximum level shown on the level indicator B. (See Fig. 2) Fig. 2...
Page 3
OPERATOR’S MANUAL JDI-5DP Operation: 2. Replace the cap and tighten. (See Fig. 3) 3. Close air valve C. (See Fig. 3) 4. Open valve C to pressurize the tank 45 PSI (Maximum of 80 PSI). Monitor the pressure using the pressure gauge E.
Page 4
C. (See Fig. 5) Fig. 5 WARNING! The JDI-5DP is to designed to be used with gasoline or any other flammable liquids. Use of such material with these units could cause serious injury.
Need help?
Do you have a question about the JDI-5DP and is the answer not in the manual?
Questions and answers