Advertisement
3.1
Precautions for Disassembly
3.1.1 Remove the top cover from the shield cover (KRK-14H only)
(1) There are three shield covers on the interface unit, the top covers can be removed.
(2) Use tweezers to slightly lift the edge of the top cover. <1>
<1>
<1>
<1>
(3) As you do step 2 above, vary the position you hold the top
cover as you lift it, and remove the top cover <2>.
Note:
Once the top cover is removed, it cannot be used again.
This service manual does not describe ADJUSTMENT.
SECTION 3
DISASSEMBLY
Shield cover
<2>
<2>
<2>
SECTION 4
ADJUSTMENT
(There is no adjustment item on KRK-14H and KRK-15B.)
Note:
Push evenly on the top cover and be careful that you do
not bend it as you install it on the shield cover.
(No.RA021<Rev.001>)1-11
Hide quick links:
Advertisement
