Download Print this page
Cornelius NORDIC B230-AP Installation Instructions
Cornelius NORDIC B230-AP Installation Instructions

Cornelius NORDIC B230-AP Installation Instructions

Plastic bins
Hide thumbs Also See for NORDIC B230-AP:

Advertisement

Quick Links

INSTALLATION INSTRUCTIONS
N
B230-AP P
ORDIC
S
AFETY
!
WARNING:
Before starting installation, read and understand all safety label and warnings on the machine. Also review and
understand all safety instructions in the owners, installation and service manuals.
Failure to comply could result in serious injury, death or damage to the equipment.
Q
S
UALIFIED
ERVICE
!
WARNING:
Only trained and certified electrical, plumbing and refrigeration technicians should service this unit.
All wiring and plumbing must conform to national and local codes. Failure to comply could
result in serious injury, death or equipment damage.
S
P
AFETY
RECAUTIONS
This unit has been specifically designed to provide protection against personal injury. To ensure continued
protection observe the following:
!
WARNING:
Disconnect power to the unit before servicing. Follow all lock out/tag out procedures established by the user. Verify all
power is off to the unit before performing any work.
Failure to comply could result in serious injury, death or damage to the equipment.
!
CAUTION:
Always be sure to keep area around the unit clean and free of clutter.
Failure to keep this area clean may result in injury or equipment damage.
Revision Date: March 17, 2014
© 2007-2014, Cornelius Inc.
B
LASTIC
INS
P
ERSONNEL
www.cornelius.com
- 1 -
Plastic Storage Bins Adapter Installation Instructions
Publication Number: 620204714INS
Revision: C

Advertisement

loading

Summary of Contents for Cornelius NORDIC B230-AP

  • Page 1 Always be sure to keep area around the unit clean and free of clutter. Failure to keep this area clean may result in injury or equipment damage. www.cornelius.com Revision Date: March 17, 2014 Revision: C © 2007-2014, Cornelius Inc. - 1 - Publication Number: 620204714INS...
  • Page 2 3. Add two strips of 1/8 x 1/2 gasket on top of the adapter right side. 4. Seal the edges of the adapter with silicone, as shown. GASKET ADAPTER TOP FRONT ASSEMBLY GASKET GASKET Figure 1. Publication Number: 620204714INS - 2 - © 2007-2014, Cornelius Inc.