Adjusting The Blue Screen Settings - Sharp LC 15A2U Operation Manual

Adjusting the BLUE SCREEN Settings

I BLUE SCREEN
Automatically turns the screen blue if a broadcast signal is not received.
Notes:
I Poor reception due to weak signals, or too much noise might activate the BLUE SCREEN function despite the
presence of a broadcast signal. To continue watching TV under these conditions, switch the BLUE SCREEN
"OFF".
I While AV input mode is selected, the BLUE SCREEN will not be shown on your TV even if the BLUE SCREEN is
turned on.
ADJUSTMENT (Continued)
1
Press the MENU to display the
MENU screen.
2
Press CH (])/([) to move the ">"
mark to "SET UP".
3
Press VOL (+)/(–) to display
SET UP mode.
4
Press the VOL (+)/(–) to display
BLUE SCREEN select mode.
5
Press the VOL (+)/(–) to select
"ON".
6
Press the MENU to exit.
(MAIN MENU screen)
(SET UP mode)
(SET UP mode)
25