Table of Contents
Advertisement
Quick Links
Rack hoist controller
Instruction Manual
Models:
ATTENTION!
This instruction manual contains important information about the
installation and the use of the equipment. Please read and follow
these instructions carefully.
Always ensure that the power to the equipment is disconnected
before opening the equipment or commencing any maintenance
work.
RMCseries: RMC12, RMC8
version 02.01 – SIL-3 Emergency since 12/2014
Advertisement
Table of Contents
Summary of Contents for SRS Light Design RMCseries
- Page 1 Rack hoist controller Instruction Manual Models: RMCseries: RMC12, RMC8 version 02.01 – SIL-3 Emergency since 12/2014 ATTENTION! This instruction manual contains important information about the installation and the use of the equipment. Please read and follow these instructions carefully. Always ensure that the power to the equipment is disconnected before opening the equipment or commencing any maintenance work.
-
Page 2: Safety Information
It should never be placed near or a over heat register or other source of heated air and it should not be installed or operated without proper ventilation. SRS Light Design s.r.o, Rybničná 36/D , 831 06 Bratislava, Slovak Republic tel:+421244681417, fax:+421244681419, www.srslight.com... -
Page 3: Functions And Control
2. Functions and Control RMC hoist controller was designed to control up to 12 (RMC-12) electrically compatible motors either separately or simultaneously; via DIGITAL cable remote or locally on the RMCseries base unit. All electrical components carry their own individual CE certification and comply with European Directives. -
Page 4: Rmcseries Base Unit
Remote A / Remote B link connectors are 3-pin /NC3MDL+NC3FDL/ or NC3MAH and • NC3FAH When controllers are linked via LINK, the STOP and GO signals of all controllers in • LOCAL mode work simultaneously. SRS Light Design s.r.o, Rybničná 36/D , 831 06 Bratislava, Slovak Republic tel:+421244681417, fax:+421244681419, www.srslight.com sales@srslight.com... -
Page 5: Optional Cmc-Digital Remote
5. Optional CMC-DIGITAL remote CMC-DIGITAL allows controlling of the RMCseries via the DIGITAL wired remote 5.1 STOP: This latching pushbutton switch turns the Hoist Control system off. Once the STOP button has been pressed, it is locked into the off position and must be rotated clockwise to be released. -
Page 6: Direction Switch Led
CMC-8D: 107 x 260 x 105 mm CMC-4D: 107 x 190 x 105 mm 1.5mm lightweight box CMC-24D: 107 x 330 x 105 mm SRS Light Design s.r.o, Rybničná 36/D , 831 06 Bratislava, Slovak Republic tel:+421244681417, fax:+421244681419, www.srslight.com sales@srslight.com... -
Page 7: Output Wiring
Pin 1: Safety line 1 IN Pin 2: Safety line 1 OUT Pin 3: Safety line 2 IN Pin 4: Safety line 2 OUT SRS Light Design s.r.o, Rybničná 36/D , 831 06 Bratislava, Slovak Republic tel:+421244681417, fax:+421244681419, www.srslight.com sales@srslight.com... -
Page 8: Remote1/Remote2 Connector Or Link Connectors
RS485 is used as a communication link. Neutrik NC5FXX/MXX Pin 1: Data common Pin 2: Data minus Pin 3: Data plus Pin 4: DC1 Pin 5: DC2 SRS Light Design s.r.o, Rybničná 36/D , 831 06 Bratislava, Slovak Republic tel:+421244681417, fax:+421244681419, www.srslight.com sales@srslight.com... -
Page 9: Linking Of Rmcseries Units
For linking of RMC base, use a 3-pin XLR cable connected as 1:1 between pins 1-3. Data are transferred thru the RS485 line. All connected devices will have GO/E-STOP button linked in the LOCAL mode. SRS Light Design s.r.o, Rybničná 36/D , 831 06 Bratislava, Slovak Republic tel:+421244681417, fax:+421244681419, www.srslight.com... -
Page 10: Technical Data
Software update via USB • 8.2 Dimensions /W x D x H/: RMC12: 483 x 365 x 132 mm RMC8: 483 x 365 x 132 mm SRS Light Design s.r.o, Rybničná 36/D , 831 06 Bratislava, Slovak Republic tel:+421244681417, fax:+421244681419, www.srslight.com sales@srslight.com... -
Page 11: Warranty
9. Warranty RMCseries hoist controller is covered by a 2-year manufacturer’s warranty. For extended warranty conditions please contact the manufacturer at sales@srslight.com. Warranty covers the original factory installed components of the controller and their correct functioning. Warranty voids if any part or replacement components are installed or modified without authorization from the manufacturer and/or the internal circuit is tampered or modified and/or the controller is operated outside normal use conditions –... -
Page 12: Declaration Of Conformity
EMC: EN55103-1, resp. EN55103-2 Is in compliance with the following requirements: Machinery directive 2006/42/EC Low Voltage directive: 2006/95/EC Bratislava, October 31, 2014 Robert Sloboda SRS Light Design s.r.o, Rybničná 36/D , 831 06 Bratislava, Slovak Republic tel:+421244681417, fax:+421244681419, www.srslight.com sales@srslight.com... -
Page 13: Table Of Contents
Linking of RMCseries units.......................7-9 Technical data ............................8-10 Protections and Safety: ......................8-10 Dimensions /W x D x H/: .......................8-10 Warranty ..............................9-11 Declaration of conformity......................10-12 Contents ...............................11-13 SRS Light Design s.r.o, Rybničná 36/D , 831 06 Bratislava, Slovak Republic tel:+421244681417, fax:+421244681419, www.srslight.com sales@srslight.com...
Need help?
Do you have a question about the RMCseries and is the answer not in the manual?
Questions and answers