Page 1
MP-70/50 Series Scoreboard Controller User Guide Document No.: 98-0002-29 Document Version: 1709.13 Effective with Firmware Version: 3.08g...
Page 2
Hockey IMEOUT TIMER SET TO - CHANGE SPORT - On the numeric keypad, enter the number of seconds T.O.TIMER TO? 00 per timeout and then press ENTER . UMBER OF TIMEOUTS LEFT - CHANGE SPORT - Enter the number of timeouts allowed, either per game # OF TOLS,1TO9? or per half.
Page 3
Hockey 1. Press HOME S.O.G. or VISITOR S.O.G. . 2. On the numeric keypad, enter the new shots on goal value and then press ENTER . ANUALLY CONTROLLING GOAL INDICATORS The HOME GOAL and VISITOR GOAL keys provide manual control of the goal indicator lights.
Page 4
Hockey If you hit the ENTER key before you enter in the player number, the control will not accept the penalty. Instead, you will see a screen 10:02. similar to the one shown, stating “NO PENALTY NO PENALTY FOUND FOUND.” Re-enter the penalty and player number using the correct sequence.
Page 5
Hockey Note: If, after entering the player penalties, you decide to cancel a player penalty (see on page 48), it is possible to ANCEL INDIVIDUAL PENALTIES cancel the penalties you entered using the plus + keys. However, it is NOT possible to cancel a multiple penalty that was entered using the OTHER key.
Page 6
Hockey 2. Press the OTHER key, which is located on the top right-hand side of your Hockey overlay keypad of the Rev. A keypad version. (This OTHER key does not appear on hockey keypads issued earlier than April 3, 2006). 3.
Page 7
Hockey 4. Press ENTER to cancel the penalty. To correct the penalty time, enter the new time on the numeric key pad and then press ENTER . DIT OR CLEAR PENALTIES 1. Press HOME PENALTY or VISITOR PENALTY . 2. Press the CLR key and the control prompts you for a player number. 3.
Page 8
Hockey SING THE INTERVAL TIMER While the interval timer settings are usually adjusted in PROGRAM mode, you can also start, stop or change the duration of the interval timer during a hockey game if necessary. For more information on the interval timer setting available in PROGRAM mode, see on page 42.
Need help?
Do you have a question about the MP-70/50 Series and is the answer not in the manual?
Questions and answers