Triumph 45-6090W Instruction Manual page 12

STEP 10
Connect P11 Mechanical Scoring Arm sensor wires to P9 Electronic Scorer as shown in FIGURE 10.
Secure Elastic Bands from P8 Ramp Chute to the back of P7 Backboard attached Wing Nuts as shown
in FIGURE 10.
Hook Elastic Loop's over Wing Nuts in six locations as shown in FIGURE 10.
Connect P16 Scoring Control Box Wire to P9 Electronic Scorer as shown in FIGURE 10 and DETAIL D.
Now attach P14 Control Box to the left corner of the front U-Tube P5 using H7 Wing Bolt as shown in
FIGURE 11. Run the rest of P16 Control Wire through the loops on P8 Ramp Chute.
Insert 3(three) pieces "AA" batteries at the backside of electronic scoreboard.
Plug the mechanical scoring arm plug into backside of the electronic scoreboard.
Press on/off button at the bottom backside of the electronic scoreboard to play and stop the game.
Control
Wire
Mechanical
Scoring Arm
Sensor DETAIL G
FIGURE 11
All RIghts Reserved.
© 2016 Escalade Sports
PARTS REQUIRED:
1 pc - H7 Wing Nut
1 pc - P14 Control Box
1 pc - P16 Scoring Control Box Wire
Elastic
Loop
NOTE: Plug the mechanical
scoring arm plug into
backside of the electronic
scoreboard.
Mechanical
Scoring Arm
Sensor
Elastic
Loop
FIGURE 10
P16
P11
Elastic Loop
Install P16 Control
Box Wire into Velcro
Straps.
12
Small phillips screwdriver
to remove and reinstall
battery cover
Elastic Loop
P14
P5
H7
For Customer Service Call 1-888-996-2729
Elastic
Loop
Elastic
Loop
P16