Appendix; Removing The Stand - Sharp Aquos LC 46SE94U Operation Manual

Appendix

Removing the Stand

• Before detaching (or attaching) the stand, unplug the AC cord from the AC INPUT terminal.
CAUTION
• Do not remove the stand from the TV unless using an optional wall mount bracket to mount it.
■
LC-46SE94U/LC-52SE94U
Before attaching/detaching the stand
• Before performing work, make sure to turn off the TV.
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being
damaged.
1
Hex key
Unfasten the four screws used to
secure the stand in place.
• To attach the stand, perform the above steps in reverse order.
■
LC-65SE94U
Before attaching/detaching the stand
• Before performing work, make sure to turn off the TV.
1
Unfasten the four screws used to
secure the stand in place.
• To attach the stand, perform the above steps in reverse order.
2
Detach the stand from the TV.
(Hold the stand so it will not drop
from the edge of the base area.)
2
Detach the stand from the TV.
3
Attach the stand hole covers.
(Align the tabs of the covers with
the holes on the TV, and press
until they lock into place.)
3
Attach the stand hole covers.
(Align the tabs of the covers with
the holes on the TV, and press
until they lock into place.)
45