WarmAir Model 135 Manual How to get Technical Help How to Contact Manufacturer (for Customer Service, Order Placement, or Technical Support): Cincinnati Sub-Zero Products, LLC Telephone 1-800-989-7373 12011 Mosteller Road (U.S) 24hr Clinical Support 1-513-460-2038 Cincinnati, OH 45241 Med Tech Support 1-888-437-5608 United States of America 1-513-772-9119...
WarmAir Model 135 Manual Table of Contents How to get Technical Help ......................2 How to Contact Manufacturer (for Customer Service, Order Placement, or Technical Support): ..2 Before You Call for Service........................ 2 In-Warranty Repair and Parts ......................2 Important Safety Information .......................
WarmAir Model 135 Manual Symbols Voltage, Alternating Current Potential Equalization Connection (Grounding) Protective Earth (Ground) Type BF Equipment (per IEC-601-1) (Patient Applied) Consult instructions for use and/or manual before operating Over-Temperature Safety Limit Under-Temperature Safety Limit Hour Meter Power On/Off Indicator Fan Only Selection Temperature Selection Switches Low setting: 32.2°C...
Safety Precautions WarmAir Model 135 Manual Section 1: Safety Precautions Cincinnati Sub-Zero Products, LLC, reserves the right to make changes to the device, which may not be reflected in this manual. General Description of the WarmAir ® The WarmAir 135 unit is a small and compact warming unit designed to supply air at temperatures of ambient, 32.2°C, ®...
Safety Precautions WarmAir Model 135 Manual Warnings A Licensed Healthcare Practitioner's order is required for setting temperature and use of equipment. At least every 20 minutes, or as directed by a Licensed Healthcare Practitioner, check the patient's temperature and skin condition of areas in contact with the disposable blanket. Pediatric and temperature-sensitive patients should be checked more frequently.
Safety Precautions WarmAir Model 135 Manual Precautions CAUTION: Federal law (U.S.A.) restricts this device to sale by or on the order of a Licensed Healthcare Practitioner. Blankets or the Warming Tube prior to use. Read all instructions provided with CSZ FilteredFlo ...
Specifications WarmAir Model 135 Manual Section 2: Specifications Physical Dimensions: 22.2 cm x 22.2 cm x 34.3 cm Hose Outlet: 1.8m flexible hose Weight: 6.1 kg Filtration: 0.2 microns, High Efficiency Construction: Impact-resistant plastic case with aluminum sub-structure. None of the WarmAir System components are made with natural rubber latex.
Specifications WarmAir Model 135 Manual Safety System Maximum Temperature Setting: 43.3°C +4.0°C 52.0°C ± 3.0°C as measured at the hose outlet Independent Primary of the device (i.e. where the hose connects to Over-Temperature Limit: the blanket). Audible and visible alarms. Heater and blower shutdown.
Page 10
Specifications WarmAir Model 135 Manual EMC COMPATIBILITY TABLES ACCORDING TO IEC 60601-1-2 Guidance and manufacturer’s declaration – electromagnetic emissions The WarmAir, Model 135 is intended for use in the electromagnetic environment specified below. The customer or the user of this unit should assure that it is used in such an environment.
Page 11
Specifications WarmAir Model 135 Manual Guidance and manufacturer’s declaration – electromagnetic immunity The WarmAir, Model 135 is intended for use in the electromagnetic environment specified below. The customer or the user of the WarmAir, Model 135 should assure that it is used in such an environment. Immunity test IEC 60601 test level Compliance level...
Specifications WarmAir Model 135 Manual Recommended separation distances between portable and mobile RF communications equipment and the WarmAir, Model 135 The WarmAir, Model 135 is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The customer or the user of the WarmAir, Model 135 can help prevent electromagnetic interference by maintaining a minimum distance between portable and mobile RF communications equipment (transmitters) and the WarmAir, Model 135 as recommended below, according to the maximum output power of the communications equipment.
Operating Instructions WarmAir Model 135 Manual Section 3: Operating Instructions Control Panel and Operation Label The control panel and operation label for the WarmAir 135 unit are located on the top of the unit. Operation Fundamentals The lower portion of the control panel gives a brief description of operating the WarmAir System.
Selecting Temperature and Using the Control Panel The control panel is located on top of the unit and is composed of four pressure sensitive touch switches, each having a LED display. The external features on the control panel of the WarmAir unit are described as follows: Power On/Off Indicator.
Page 15
CAUTION! Do not attempt to warm patient with hose only. Operating the WarmAir 135 unit without a blanket may result in patient injury. CAUTION! High temperature setting to be used with close patient observation. Reduce air temperature or discontinue therapy when the therapeutic goal is reached or if vital signs instability occurs.
Mounting the WarmAir Unit The WarmAir 135 unit must be mounted securely before it is used. There are three ways to mount the unit: 1. IV Pole Clamp The unit may hook onto a secure, vertical IV pole of no less than 2.2 cm and no more than 2.86 cm in diameter.
Preventive Maintenance WarmAir Model 135 Manual Section 4: Preventive Maintenance Cleaning the Unit For cleaning and disinfecting always use conventional hospital-approved, topical equipment cleaners, and disinfectants. Thoroughly wipe down device with a damp cloth to remove any residue from cleaning solutions. Ensure that all inaccessible cracks and crevices on the WarmAir are reached during cleaning.
Need help?
Do you have a question about the Warmair 135 and is the answer not in the manual?
Questions and answers