Subscribe to Our Youtube Channel
Summary of Contents for CVW PRO 200
- Page 1 Zero Latency PRO 200 User Manual Model: 7051(Transmitter) 3051(Receiver) Version:1.0...
-
Page 3: Table Of Contents
Contents - If there is any question or difficulty about the operation of product, please feel free to contact us or the dealer. - CVW reser ves the authority to modify the instruction manuals. About this manual Brief introduction Brief Introduction... -
Page 4: Packing List
Packing List Specification Please check the package inside to assure it contains the parts as below, Specification Item if any parts missed, please contact the distributor or us. Frequency Image transmission： 5.15~5.25GHz(for FCC) and 5.725~5.85GHz (for FCC&IC) Bandwidth 40MHz 1080psf 23.98/24/25 1080P 23.98/24/25/30/50/60 720P 50/59.94/60 Video Formats... -
Page 5: Specification
Mechanical Information Transmitter Interface Transmitter Interface Description Model：7051 Specification Item 5.8G Antenna Interface LED Digits Display Display the working channel Power indicator OK Button Confirm the function selection Video indicator Switch the working channel CH Button LED Digits Display Be used for software upgrading Mini USB OK Button HDMI IN... - Page 6 Receiver Interface Model：3051 Receiver Interface Description 5.8G Antenna Interface Specification Item LED Digits Display Display the working channel OK Button Confirm the function selection Power indicator Switch the working channel CH Button Video indicator Be used for software upgrading Mini USB LED Digits Display OK Button HDMI OUT...
-
Page 7: Product Installation
Product Installation 3. Turn on the power switch to start Transmitter Installation Steps: power supplying. 1. Fix the antennas and adjust their angles as shown in the figure below. (For details, see the Transmission Distance Description.) Power Switch: ON turn on OFF turn off 4. - Page 8 Receiver Installation Steps: 3. Turn on the power switch to start power supplying. 1. Fix the antennas and adjust their angles as shown in the figure below. Power Switch: ON turn on OFF turn off Notice: please rotate the golden mental part of antenna to fasten the antenna.
-
Page 9: Led Digits Display Description
LED Digits Display description Support Full PSF resolution LED Digits Display Status Support Full PSF resolution 25PFS in = 25PFS out 23.98P in=23.98P out Power Indicator Video Indicator 29.97PSF=29.97PSF out 24P in=24P out 30PSF in = 30PSF out 25P in=25P out 29.97P in=29.97P out 30P in=30P out 50i in = 50i out... -
Page 10: Transmission Distance Description
Transmission Distance Description Transmission Distance Standard Distance Provided that the product is working under the condition of line of sight distance by adopting the optimal installation: Make receiver to stand vertically; adjust antennas to a fan-shaped arrangement; Make transmitter to stand vertically; adjust the right side of the 2 transmitter antennas towards backside by 45°;... -
Page 11: Trouble Shooting
Trouble shooting When the front side of the transmitter is not able Display“Link Connecting” to face to the receiver, please try to adjust the direction of transmitter antennas to make sure that the formative fan-shaped arrangement can face to the receiver for best signal transmission. As shown in the right figure: Notice: the channel 1 is not recommended in the long distance transmission due to its limited performance. - Page 12 This equipment complies Part 15 of the FCC Rules. Operation is subject to following two conditions: 1) This device may not cause hardful interference,and 2)This device must accept any interference receiced, including interference that may cause undesired operation. Image displayed,No audio Video source mute Turn on the audio of video source Turn up the audio of video source...
- Page 13 RSS warning This device complies with ISEDC licence‐exempt RSS standard (s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference,including interference that may cause undesired operation of the device. Le présent areil est conforme aux CNR d'ISEDC licables aux areils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'areil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. ...
Need help?
Do you have a question about the PRO 200 and is the answer not in the manual?
Questions and answers