Parts Ordering; Parts List - Emerson Fisher 9500 Instruction Manual

9500 Valve
February 2019

Parts Ordering

A serial number is assigned to each valve body and stamped on the nameplate. Always refer to the serial number when
corresponding with your
replacement parts, also specify the complete 11‐character part number from the parts list information.
WARNING
Use only genuine Fisher replacement parts. Components that are not supplied by Emerson Automation Solutions should
not, under any circumstances, be used in any Fisher valve, because they may void your warranty, might adversely affect the
performance of the valve, and could cause personal injury and property damage.

Parts List

Note
Contact your Emerson sales office
Key Description
1 Valve Body
If you need a valve body as a replacement part, order
by valve size, serial number, and desired material.
2* Liner Assy
3 Disk
4* Shaft
16
Emerson sales office regarding spare parts or technical information. When ordering
for parts ordering information.
Key Description
6* Sleeve/Bushing Assy (2 req'd)
9 Plate, Thrust (2 req'd)
10 Screw,Cap, hex hd (4 req'd)
15* Taper Pin (2 req'd)
16 Nameplate
17 Drive Screw (2 req'd)
19 Flow Tag (FISHTAIL disk only)
21 FISHTAIL Disk Tag (FISHTAIL disk only)
22 Flange Tag (not shown)
26 Seal & Wire (not shown)
130 Clamp
131 Bounding strap assembly
132 Flange Adapter (not shown) (2 req'd)
*Recommended spare parts
Instruction Manual
D100380X012