Page 5
• Stop use immediately if a problem occurs. SAFETY GUIDELINES Touchscreen Failure to do so may cause injury or damage • Do NOT attach any object to the touch- to the product. Return it to your authorized screen, doing so can result in damage to WARNING! dealer for repair.
Page 6
CD) into your vehicle if it came from a vices (e.g. personal mobile phones, USBs, FCA US LLC, working with its suppliers, evalu- trusted source. Media of unknown origin CDs). ates and takes appropriate steps as needed.
IDENTIFYING YOUR RADIO • IDENTIFYING YOUR RADIO ......8...
Page 9
IDENTIFYING YOUR RADIO Key Features Uconnect 8.4 NAV The following features are available: • 8.4” Touchscreen • Hands-free/Bluetooth • USB port, AUX jack and SD Card slot — If Equipped • Touchscreen Climate Controls • Navigation Standard • One-shot destination entry •...
UCONNECT 8.4 NAV SYSTEM 4. Apps PERSONALIZED MENU BAR The Uconnect features and services in the main Press the “Apps ” button — If Equipped to menu bar are easily changed for your conve- access Apps. nience. Simply follow these steps: 5.
Page 12
• DAB, DAB+ and DMB – If Equipped Seek And Direct Tune Functions Fast Seek Down Press the RADIO button on the touchscreen, The Seek Up and Down functions are activated Press and hold the “Seek Down” button on bottom left corner, to enter the Radio Mode. The by pressing the double arrow buttons on the the touchscreen to advance the radio through different tuner modes;...
The selected Station or Channel number is Preset Selection From List Balance/Fade displayed in the Direct Tune text box. A Preset can be selected by pressing any of the listed Presets, or by pushing the ENTER/ Setting Presets BROWSE button on the TUNE/SCROLL knob to The Presets are available for all Radio Modes, select the currently highlighted Preset.
Page 14
Equalizer Speed Adjusted Volume AUX Volume Offset Press the “Equalizer” button on the touchscreen Press the “Speed Adjusted Volume” button on to activate the Equalizer screen. the touchscreen to activate the Speed Adjusted Volume screen. Press the “+” or “–” buttons, or by pressing and dragging over the level bar for each of the The Speed Adjusted Volume is adjusted by equalizer bands.
the display. Once in Media Mode, press the The AUX Volume Offset is adjusted by pressing The following describes the left-hand control of the “+” and “–” buttons. This alters the AUX operation in each mode. “Source” button on the touchscreen and select input audio volume.
Repeat the line above and below the track name) and which can be scrolled by pressing the “Up” and then push the ENTER/BROWSE knob to start “Down” buttons to the right. The TUNE/SCROLL Press the “Repeat” button on the touchscreen to playing that track.
SCROLL knob to highlight a track (indicated by NOTE: The vehicle radio unit is acting as the browse window displays a list of ways you can the line above and below the track name) and amplifier for audio output from the Auxiliary browse through the contents of the SD Card.
Tracks Pressing the “trks” button on the touchscreen while the pop up is displayed will close the pop Press the “trks” button on the touchscreen to display a pop up with the Song List. The cur- rently playing song is indicated by an arrow and Audio lines above and below the song title.
Page 19
• Searching Contacts phone number (“Search For Uconnect customer support: linked (or paired) mobile phone and one audio for John Smith Mobile”). device can be used with the system at a time. • Visit UconnectPhone.com NOTE: Examples of Voice Commands are pro- Uconnect Phone allows you to transfer calls vided throughout this manual.
Operation Phone works best when you talk in a normal To activate the Uconnect Phone from idle, sim- conversational tone, as if speaking to some- ply push the Phone button on your steering Voice commands can be used to operate the one sitting a few feet/meters away from you.
Page 21
1. Place the ignition in the ACC or ON position. 8. When prompted on the mobile phone, accept the connection request from Uconnect Phone. 2. Press the “Phone” button in the Menu Bar on the touchscreen. NOTE: Some mobile phones will require you to enter the PIN number.
Page 22
NOTE: For phones which are not made a favor- 7. When the pairing process has successfully Disconnecting A Phone Or Audio Device ite, the phone priority is determined by the order completed, the system will prompt you to 1. Press the “Settings” button on the touch- in which it was paired.
Page 23
Making A Phone Or Audio Device A Bluetooth wireless phone connection is made 2. After loading the mobile phonebook, select Favorite to the Uconnect Phone, for example, after phonebook from the Phone main screen, then you start the vehicle. select the appropriate number. Press the "Set- 1.
Phone Call Features Call By Saying A Phonebook Name If your vehicle has two buttons on the steering wheel (VR and Phone), press the VR button The following features can be accessed through 1. Push the Phone button on your steering on your steering wheel to send a touch-tone.
Page 25
steering wheel to accept the call. You can also Automatic reply messages can be: Toggling Between Calls press the “answer” button on the touchscreen or If two calls are in progress (one active and one • “I am driving right now, I will get back to you press the caller ID box.
• Speak normally, without pausing, just as you NOTE: The call will remain within the vehicle Phonebook (Mobile and Favorites) name recog- audio system until the phone becomes out of would speak to a person sitting a few feet/ nition rate is optimized when the entries are not range for the Bluetooth connection.
Voice Text Reply “I’ll call “Where “See Once your Uconnect system is paired with a you later.” are you?” <number> min- compatible mobile device, the system can an- utes.” nounce a new incoming text message, and read it to you over the vehicle audio system. You can “I can’t talk “Stuck in “I...
Where To? Point of Interest quickly enter a destination without the need to input the city name or street. Press this button on the touchscreen when you Where To? — Main Menu want to route to a point of interest. The Point of City Center Interest (POI) database allows you to select a Press this button on the touchscreen to route to...
Page 29
Where To? — Address To enter a destination by Address, follow these steps: 1. While in the Nav Main Menu, press the “Where To?” button on the touchscreen, then press the “Address” button on the touchscreen. If you press “Enter City,” you will have to enter Once the correct City, Street and Number has and select/press the desired city name, followed been entered, you will be asked to confirm your...
Page 30
If you are currently on a route guidance and you 2. Press the button on the touchscreen with the select Recent, the system will ask you to choose name of the desired destination. one of the following: 3. Confirm the route with “Yes” to start the route •...
Page 31
You can also change your POI search area, by NOTE: You can press the “back arrow” button 2. Press the button on the touchscreen with the pressing the “Change Search Area” button on on the touchscreen to return to the previous name of the desired favorite destination and the touchscreen.
Page 32
The following Options are available for each favorite destination: • Edit Name • Add Phone Number If you are currently on a route guidance and you select a Favorite, the system will ask you to choose one of the following: •...
Page 33
• Address NOTE: You can press the “back arrow” button 3. Press “Clear Home” and then press “Yes” to on the touchscreen to return to the previous clear/delete your Home Address. • Recent screen or the “X” button on the touchscreen to 4.
Page 34
• Favorites NOTE: • Intersection You can press the “back arrow” button on the touchscreen to return to the previous • GEO Coordinates screen or the “X” button on the touchscreen • Point on Map to exit. • City Center Where To? —...
Page 35
NOTE: You can press the “back arrow” button on the touchscreen to return to the previous screen or the “X” button on the touchscreen to exit. Where To? — Point on Map To enter a destination by Point on Map, follow these steps: 1.
Page 36
Where To? — City Center 1. While in the Nav Main Menu, press the To enter a destination by City Center, follow “Where To?” button on the touchscreen then these steps: press the “Closest City” button on the touch- screen. 1.
Page 37
3. Press the “Yes” button on the touchscreen to Where To? — Phone confirm your destination and begin your route. To enter a destination by Phone number, follow these steps: If you are currently on a route guidance and you select a Closest City, the system will ask you to 1.
Page 38
• Add as last destination NOTE: You can press the “back arrow” button on the touchscreen to return to the previous screen or the “X” button on the touchscreen to exit. Before Route Guidance Before confirming the route with the “Yes” button on the touchscreen, it is possible to select options different from the default route settings.
• Repeat View Map Time of Arrival/Time to Destination/Distance (only during route guidance) Press this button on the touchscreen to repeat View Map — Main Menu Press the button in the upper right area of the the current voice prompt. Press the “View Map”...
Page 40
• Speed Limit — Press this button on the touchscreen to turn on/off speed limit warning announcements and to enter a pre-defined speed limit for your route. • Guidance — Press this button on the touch- screen to display items to customize your route guidance.
Page 41
• 3D (3D Map View Is Only Available On during guidance in Map View. Press the desired Uconnect 8.4 NAV. Must Select 3D City Mod- button on the touchscreen. els Or 3D Landmarks For 3D Map View To • Far Display.) •...
Page 42
the touchscreen until a check-mark appears, Park Areas tings” button on the touchscreen and then the showing the setting has been selected. “Guidance” button on the touchscreen. You can Press this button on the touchscreen to display also access this menu by pressing the “Settings” Speed and Flow Park Areas while in Map View.
• Avoid release the button on the touchscreen until a Information — Where Am I? check-mark appears, showing the setting has To select “Where Am I?” information, follow Press the Avoid button on the touchscreen to been selected. these steps: choose road types to avoid during your route.
• Distance Traveled Information — Trip Computer To select “Trip Computer” information, follow • Overall average speed these steps: • Moving average speed 1. While in the Nav Main Menu, press the “Information” button on the touchscreen. • Maximum speed reached 2.
Page 45
• Name • Distance • ABC (Search) NOTE: In case of emergency, please contact the facility to verify their availability before pro- ceeding. 3. Press the desired Hospital and press “Yes” to confirm the destination. If you are currently on a route guidance and you select a Hospital the system will ask you to choose one of the following: •...
Page 46
• Distance You can search for a Fire Department by the following categories, which are button tabs at • ABC (Search) the top of the screen. NOTE: In case of emergency, please contact • Name the facility to verify their availability before pro- •...
Map Updates The map data available in your vehicle is the most up-to-date information that was available when your vehicle was built. Map data is up- dated periodically as map information changes. Follow the steps below if you wish to obtain an update for your vehicle.
UCONNECT SETTINGS • UCONNECT 8.4 NAV SETTINGS ......48 • PERFORMANCE CONTROL/PAGES AND DRIVE MODES ..48...
Page 49
UCONNECT 8.4 NAV SETTINGS PERFORMANCE CONTROL/ Press the “Apps ” button on the touchscreen, PAGES AND DRIVE MODES then press the “Settings ” button on the Your vehicle may be equipped with Performance touchscreen to display the menu setting screen. Control, Performance Pages and Drive Mode In this mode, the Uconnect system allows you to features.
UCONNECT 8.4/8.4 NAV VOICE 4. Each time you give a Voice Command, you Basic Voice Commands must first push either the VR or Phone button, The basic Voice Commands below can be given RECOGNITION QUICK TIPS wait until after the beep, then say your Voice at any point while using your Uconnect system.
Radio Push the VR button . After the beep, say one Phone of the following commands and follow the Use your voice to quickly get to the AM, or FM Making and answering hands-free phone calls is prompts to switch your media source or choose stations you would like to hear.
TIP: When providing a Voice Command, push PRE-DEFINED VOICE TEXT REPLY RE- the Phone button and say “Call,” then pro- SPONSES nounce the name exactly as it appears in your Yes. Stuck in See you phone book. When a contact has multiple phone traffic.
Push the VR button . After the beep, say one 1. To enter a destination, push the VR button designed to keep your eyes on the road and of the following commands… . After the beep, say… your hands on the wheel by letting Siri help you perform useful tasks.