Sharp 20F540 L Operation Manual page 38

Using the Video and Audio Input Jacks (Continued)
Video Equipment with
Component Video
(Component Color)
Output Jacks (Y, P and P
B
To AUDIO
OUTPUT
(L/R)
L To watch video material playback.
• Press the Remote's INPUT button to select the VIDEO INPUT mode for the video equipment you wish
to play.
• The external VIDEO INPUT mode will change as follows each time the INPUT button is pressed.
AIR INPUT 1 (or COMPONENT)
or
CABLE
• When the AV cables are being connected to the VIDEO INPUT 1 and COMPONENT Y terminals
simultaneously, the COMPONENT terminal has priority over the VIDEO terminal.
• INPUT mode can be selected by pressing either the
is set to the highest channel stored in memory, or by pressing the
lowest channel.
Note:
• When connecting video or audio equipment to the television, be sure that the power is turned off in
order to prevent damage to either the television or the equipment being connected.
• It is the intent of SHARP that this product be used in full compliance with the copyright law of the
United States and that prior permission be obtained from copyright owners whenever necessary.
• For detailed information on the connection and use of auxiliary equipment, refer to the instruction
manuals of the equipment being used.
• The connection cords can be obtained from your local video store.
38
(Rear connection terminals of TV)
)
R
To COMPONENT
VIDEO OUTPUT
Jacks
(IN 1)
Rear
IN 1
COMPONENT
Y R
AUDIO
P L
B
P VIDEO
R
INPUT 2
(IN 2)
Front
CH a on the TV remote control when the TV
Video Equipment
LINE
OUT
R
L
CH s when it is set to the