Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for APAC Opto Electronics AO-1210
- Page 1 APAC Opto Electronics Inc. AO-1210 LAN to ZigBee Converter Quick User Manual...
- Page 2 AO-1210 will receive the same data. 2. Wiring There are 2 approaches to connect AO-1210 and the host PC. 1. Use the “Cross Over” CAT-5 cable to link AO-1210 and the Host PC directly, as shown below. AO-1210 CAT-5 Cross Over...
- Page 3 3. Quick Start 3.1 LAN Settings AO-1210 has a built-in web server, users can change all internal parameter setting by browser interface. The default IP address is 192.168.0.1. To set the parameters, users can use any browser and open the URL (http://192.168.0.1/setting.htm).
- Page 4 Router, NID=0001, PID=0020, 26 channel, TX output power 4.5dBm. ///C000000202600 Coordinator, NID=0000, PID=0020, 26 channel, TX output power 4.5dBm. Query command: ///? HOST sends “///?” to query AO-1210 ZigBee setting status AO-1210 responses ///xNNNNPPPPChPo (refer to (2) format description) Send command: received unspecified NID, i.e., data broadcast mode...
- Page 5 AO-1210 LAN to ZigBee Converter User Manual Assign NODE ID=0x0243 Route to receive data “hallo_world!” 3.3 ZigBee Settings (AT command): please refer to AO-1503 user manual. 4. Hardware Features Serial Interface Interface: UART compatibility. Data Rate: 9600 bps. Characters: 8.
Need help?
Do you have a question about the AO-1210 and is the answer not in the manual?
Questions and answers