Advertisement
How to Assemble Spotting Scope:
1.
Remove the Spotting Scope (#1) and Tripod (#2) from Carrying Case (#9). Attach Spotting
Scope to the Tripod (#2), tightening the Knobs (#8A & #8B). Adjust height and tighten
knob (#8D).
2.
Flip up Sight Finder (#7). See Figure 1.
3.
The angle for using the Spotting Scope is adjusted by tightening Knob (#8C) after finding the
desired position for viewing. See Figure 2.
4.
For storage the Sun Shade (#5) is reversed to conserve space in the Carring Case (#9).
REMOVE Sun Shade and Large Lens Cap (#4). See Figure 2.
5.
Reverse Sun Shade (#5) and replace over Lens at the end of the Spotting Scope (#1). Twist
Sun Shade until "red dots" line up with "visual reference point". See Figure 3.
(#5)
Flip
5.
Remove Small Eye Piece Cover (#6) from Eye Piece (#10) and focus Eye Piece until you
can see clearly. Adjust the lens magnification (30x or 60x) by turning the dial located on the
Eye Piece.
6.
Store Spotting Scope (#1) in Carrying Case (#9). Tripod (#2) collapses and can be placed
in side zipper compartment of Carrying Case. Remove Sun Shade (#5). Flip around
and place over Lens. Replace Large Lens Cap (#4) to avoid scratches. Place Small Eye
Piece Cover (#6) over Eye Piece (#3) and place Spotting Scope (#1) in large zipper compart-
ment of Carrying Case. Store in safe, dry place as this is a delicate precision instrument.
1.
For better and safer performance, keep all parts of this product clean and dry at
all times.
SKU 03298
#8C
Figure 2
MAINTENANCE
#6
#10
PAGE 4
#7
Figure 1
#8A
#5
Visual
Reference
Point
Red Dots
Figure 3
Advertisement
